FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/sim/sim32.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/* * SIM32.C * * Pole Star SIM * * Target : ARM * * Copyright (c) Texas Instruments 1995 * */ #define SIM32_C 1 #include "chipset.cfg" #include "main/sys_types.h" #include <assert.h> #include "inth/iq.h" #include "sim.h" #ifdef SIM_DEBUG_TRACE /* working buffer for NULL BYTE */ extern SYS_UWORD8 SIM_dbg_null[]; /* Nucleus variable given the current number of TDMA frames */ extern SYS_UWORD32 IQ_FrameCount; /* working variable to calculate the TDMA ecart */ extern SYS_UWORD16 SIM_dbg_tdma_diff; /* working variable storing the current number of TDMA frames elapsed */ SYS_UWORD32 SIM_dbg_local_count; #endif /* * SIM_IntHandler * * Read cause of SIM interrupt : * * if receive buffer full, read char * if transmitter empty, change direction, transmit a dummy char * */ void SIM_IntHandler(void) { volatile unsigned short it, i, stat, conf1; volatile SYS_UWORD8 ins; volatile SYS_UWORD8 rx; volatile SYS_UWORD8 nack; volatile SYS_UWORD8 nack1; SIM_PORT *p; p = &(Sim[0]); p->rxParityErr = 0; it = p->c->it; if ((it & SIM_IT_ITRX) && !(p->c->maskit & SIM_MASK_RX)) // int on reception { stat = p->c->rx; conf1 = p->conf1; #ifdef SIM_DEBUG_TRACE if ((IQ_FrameCount - SIM_dbg_local_count) > SIM_dbg_tdma_diff) { SIM_dbg_tdma_diff = IQ_FrameCount - SIM_dbg_local_count; } SIM_dbg_local_count = IQ_FrameCount; #endif // Check if reception parity is enable if (((conf1 & SIM_CONF1_CHKPAR) && ((stat & SIM_DRX_STATRXPAR) != 0))\ || ((conf1 & SIM_CONF1_CHKPAR) == 0)) { rx = (SYS_UWORD8) (stat & 0x00FF); ins = p->xbuf[1] & p->hw_mask; nack = (~p->xbuf[1]) & p->hw_mask; switch (p->moderx) { case 0: //mode of normal reception without proc char (like PTS proc) p->rbuf[p->rx_index++] = rx; break; case 1: //mode wait for ACK if ((rx & p->hw_mask) == ins) { p->moderx = 2; } else if ((rx & p->hw_mask) == nack) { p->moderx = 4; } else if (((rx & 0xF0) == 0x60) || ((rx & 0xF0) == 0x90)) { if (rx != 0x60) //in case of error code (SW1/SW2) returned by sim card { p->rSW12[p->SWcount++] = rx; p->moderx = 5; } else { p->null_received = 1; #ifdef SIM_DEBUG_TRACE SIM_dbg_null[0]++; #endif } } else { p->errorSIM = SIM_ERR_ABNORMAL_CASE2; } //if rx = 0x60 wait for ACK break; case 2: //mode reception by block p->rbuf[p->rx_index++] = rx; if(p->expected_data == 256) { if (p->rx_index == 0) { p->moderx = 5; } } else { if (p->rx_index == p->expected_data) { p->moderx = 5; } } break; case 3: //mode reception char by char. reception of proc char if ((rx & p->hw_mask) == ins) { p->moderx = 2; } else if ((rx & p->hw_mask) == nack) { p->moderx = 4; } //if rx = 0x60 wait for ACK else if (rx == 0x60) { p->null_received == 1; #ifdef SIM_DEBUG_TRACE SIM_dbg_null[1]++; #endif } break; case 4: //mode reception char by char. reception of data p->rbuf[p->rx_index++] = rx; p->moderx = 3; //switch to receive proc char mode if(p->expected_data == 256) { if (p->rx_index == 0) { p->moderx = 5; } } else { if (p->rx_index == p->expected_data) { p->moderx = 5; } } break; case 5: //mode wait for procedure character except NULL if ((rx != 0x60) || (p->SWcount != 0)) //treat NULL character only if arriving before SW1 SW2 { p->rSW12[p->SWcount++] = rx; } else { p->null_received = 1; #ifdef SIM_DEBUG_TRACE SIM_dbg_null[2]++; #endif } break; case 6: //give the acknowledge char if (((rx & 0xF0) == 0x60) || ((rx & 0xF0) == 0x90)) { if (rx != 0x60) //in case of error code (SW1/SW2) returned by sim card { p->rSW12[p->SWcount++] = rx; p->moderx = 5; } else { p->null_received = 1; #ifdef SIM_DEBUG_TRACE SIM_dbg_null[3]++; #endif } } else { p->ack = rx; } } } else { p->rxParityErr = 1; } } if ((it & SIM_IT_ITTX) && !(p->c->maskit & SIM_MASK_TX)) { #ifdef SIM_DEBUG_TRACE SIM_dbg_local_count = IQ_FrameCount; #endif // check the transmit parity stat = p->c->stat; if ((stat & SIM_STAT_TXPAR) || ((p->conf1 & SIM_CONF1_CHKPAR) == 0)) //parity disable { if (p->xOut != (p->xIn - 1)) //if only one char transmitted (already transmitted) { //just need to have confirmation of reception if (p->xOut == (p->xIn - 2)) { p->xOut++; p->c->tx = *(p->xOut); // transmit p->conf1 &= ~SIM_CONF1_TXRX; // return the direction p->c->conf1 = p->conf1; } if (p->xOut < (p->xIn - 2)) { p->xOut++; p->c->tx = *(p->xOut); // transmit } } } else { p->c->tx = *(p->xOut); // transmit same char p->txParityErr++; // count number of transmit parity errors } } // Handle errors if ((it & SIM_IT_ITOV) && !(p->c->maskit & SIM_MASK_OV)) { p->errorSIM = SIM_ERR_OVF; } if ((it & SIM_IT_WT) && !(p->c->maskit & SIM_MASK_WT)) { p->errorSIM = SIM_ERR_READ; } // Reset the card in case of NATR to let the program continue if ((it & SIM_IT_NATR) && !(p->c->maskit & SIM_MASK_NATR)) { p->c->cmd = SIM_CMD_STOP; p->errorSIM = SIM_ERR_NATR; } #if ((CHIPSET == 2) || (CHIPSET == 3)) // SIM card insertion / extraction if ((it & SIM_IT_CD) && !(p->c->maskit & SIM_MASK_CD)) { stat = p->c->stat; if ((stat & SIM_STAT_CD) != SIM_STAT_CD) { (p->RemoveFunc)(); p->errorSIM = SIM_ERR_NOCARD; } } #endif } #if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) /* * SIM_CD_IntHandler * * Read cause of SIM interrupt : * */ void SIM_CD_IntHandler(void) { volatile unsigned short it_cd, stat; SIM_PORT *p; p = &(Sim[0]); p->rxParityErr = 0; it_cd = p->c->it_cd; // SIM card insertion / extraction if ((it_cd & SIM_IT_CD) && !(p->c->maskit & SIM_MASK_CD)) { stat = p->c->stat; if ((stat & SIM_STAT_CD) != SIM_STAT_CD) { (p->RemoveFunc)(); p->errorSIM = SIM_ERR_NOCARD; } } } #endif // to force this module to be linked SYS_UWORD16 SIM_Dummy(void) { }