FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/spi/spi_process.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/*****************************************************************************/ /* */ /* Name spi_process.h */ /* */ /* Function this file contains the spi_process function prototype, */ /* used to handle messages received in the SPI task mailbox. */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------ */ /* */ /* Author Candice Bazanegue */ /* */ /* (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved */ /*****************************************************************************/ #ifndef __SPI_PROCESS_H__ #define __SPI_PROCESS_H__ #define SPI_ABB_READ_EVT 1 #define SPI_ABB_WRITE_EVT 2 #define SPI_ABB_CONF_ADC_EVT 3 #define SPI_ABB_READ_ADC_EVT 4 #define ABB_EXT_IRQ_EVT 5 /* Prototypes */ /******************************************************************************* ** Function spi_process ** ** Description It is called by the spi task core to handle the access to ** the ABB through the SPI in a non-preemptive way. ** *******************************************************************************/ UINT8 spi_process(T_RV_HDR * msg_ptr); #endif /* __SPI_PROCESS_H__ */