FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/uart/faxdata.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/******************************************************************************* * * FAXDATA.H * * This module defines constants used by UART and USART fax/data drivers. * * (C) Texas Instruments 1999 * ******************************************************************************/ #ifndef __FAXDATA_H__ #define __FAXDATA_H__ /* * Returned values. */ #define FD_OK ( 0) #define FD_SUSPENDED (-1) #define FD_NOT_SUPPORTED (-2) #define FD_NOT_READY (-3) #define FD_INTERNAL_ERR (-9) /* * Line status. */ #define FD_LINE_ON (1) #define FD_LINE_OFF (0) /* * Signals used in UAF_xxx_GetLineState and UAF_xxx_SetLineState. */ #define CTS ( 0) /* set */ #define RTS ( 1) /* get */ #define DSR ( 2) /* set */ #define DTR ( 3) /* get */ #define DCD ( 4) /* set */ #define BRK ( 5) /* set/get */ #define ESC ( 6) /* get */ #define TXSTP ( 7) /* get */ #define RXSTP ( 8) /* get */ #define BRKLEN ( 9) /* set/get (8 bits) */ #define RXBLEV (17) /* get (12 bits) */ #define SA (29) /* set/get */ #define SB (30) /* set/get */ #define X (31) /* set/get */ #define RI (1) /* * Size of the circular buffers used in the driver. */ #define FD_MAX_BUFFER_SIZE (512) /* In bytes. */ /* * Type of the returned value for each function. */ typedef short T_FDRET; /* * Baud rates. */ typedef enum { FD_BAUD_AUTO, FD_BAUD_75, FD_BAUD_150, FD_BAUD_300, FD_BAUD_600, FD_BAUD_1200, FD_BAUD_2400, FD_BAUD_4800, FD_BAUD_7200, FD_BAUD_9600, FD_BAUD_14400, FD_BAUD_19200, FD_BAUD_28800, FD_BAUD_33900, FD_BAUD_38400, FD_BAUD_57600, FD_BAUD_115200, FD_BAUD_203125, FD_BAUD_406250, FD_BAUD_812500 } T_baudrate; /* * Bits per character. */ typedef enum { bpc_7, bpc_8 } T_bitsPerCharacter; /* * Stop bits. */ typedef enum { sb_1, sb_2 } T_stopBits; /* * Parity. */ typedef enum { pa_none, pa_even, pa_odd, pa_space } T_parity; /* * Flow control mode. */ typedef enum { fc_none, fc_rts, fc_dtr, fc_xoff } T_flowCtrlMode; /* * Suspend parameter used in UAF_xxx_ReadData and UAF_xxx_WriteData. */ typedef enum { sm_noSuspend, sm_suspend } T_suspendMode; /* * Install mode parameter used in UAF_xxx_ReadData and UAF_xxx_WriteData. */ typedef enum { rm_notDefined, rm_reInstall, rm_noInstall } T_reInstMode; #endif /* __FAXDATA_H__ */