FreeCalypso > hg > fc-magnetite
view src/cs/layer1/audio_include/l1audio_abb.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/* * Filename l1audio_abb.h * Copyright 2003 (C) Texas Instruments * * */ #define ABB_L1_WRITE(addr,data) (((data) << 6) | (addr) | 0x01) void ABB_CAL_UlVolume (UWORD8 pga_index); void ABB_CAL_DlVolume (UWORD8 volume_index, UWORD8 pga_index); void ABB_UlVolume (UWORD8 volume_index); void ABB_DlVolume (UWORD8 volume_index); void ABB_DlMute (BOOL mute); void ABB_SideTone (UWORD8 volume_index); void ABB_Audio_Config (UWORD16 data); void ABB_Audio_Config_2 (UWORD16 data); void ABB_UlMute (BOOL mute); void ABB_Audio_Control (UWORD16 data); void ABB_Audio_On_Off (UWORD16 data); void ABB_Audio_Volume (UWORD16 data); void ABB_Audio_PLL (UWORD16 data); void ABB_Audio_VBPop (UWORD16 data); void ABB_Audio_Delay_Init (UWORD8 delay);