FreeCalypso > hg > fc-magnetite
view src/cs/layer1/audio_include/l1audio_signa.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1AUDIO_SIGNA.H * * Filename l1audio_signa.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #if (AUDIO_TASK == 1) #define P_AUDIO ( 0x18 ) // Messages MMI <-> L1A #if (KEYBEEP) #define MMI_KEYBEEP_START_REQ ( ( P_AUDIO << 8 ) | 0 ) #define MMI_KEYBEEP_STOP_REQ ( ( P_AUDIO << 8 ) | 1 ) #define MMI_KEYBEEP_START_CON ( ( P_AUDIO << 8 ) | 2 ) #define MMI_KEYBEEP_STOP_CON ( ( P_AUDIO << 8 ) | 3 ) #endif #if (TONE) #define MMI_TONE_START_REQ ( ( P_AUDIO << 8 ) | 4 ) #define MMI_TONE_STOP_REQ ( ( P_AUDIO << 8 ) | 5 ) #define MMI_TONE_START_CON ( ( P_AUDIO << 8 ) | 6 ) #define MMI_TONE_STOP_CON ( ( P_AUDIO << 8 ) | 7 ) #endif #if (MELODY_E1) #define MMI_MELODY0_START_REQ ( ( P_AUDIO << 8 ) | 8 ) #define MMI_MELODY0_STOP_REQ ( ( P_AUDIO << 8 ) | 9 ) #define MMI_MELODY0_START_CON ( ( P_AUDIO << 8 ) | 10 ) #define MMI_MELODY0_STOP_CON ( ( P_AUDIO << 8 ) | 11 ) #define MMI_MELODY1_START_REQ ( ( P_AUDIO << 8 ) | 12 ) #define MMI_MELODY1_STOP_REQ ( ( P_AUDIO << 8 ) | 13 ) #define MMI_MELODY1_START_CON ( ( P_AUDIO << 8 ) | 14 ) #define MMI_MELODY1_STOP_CON ( ( P_AUDIO << 8 ) | 15 ) #endif #if (VOICE_MEMO) #define MMI_VM_PLAY_START_REQ ( ( P_AUDIO << 8 ) | 16 ) #define MMI_VM_PLAY_STOP_REQ ( ( P_AUDIO << 8 ) | 17 ) #define MMI_VM_PLAY_START_CON ( ( P_AUDIO << 8 ) | 18 ) #define MMI_VM_PLAY_STOP_CON ( ( P_AUDIO << 8 ) | 19 ) #define MMI_VM_RECORD_START_REQ ( ( P_AUDIO << 8 ) | 20 ) #define MMI_VM_RECORD_STOP_REQ ( ( P_AUDIO << 8 ) | 21 ) #define MMI_VM_RECORD_START_CON ( ( P_AUDIO << 8 ) | 22 ) #define MMI_VM_RECORD_STOP_CON ( ( P_AUDIO << 8 ) | 23 ) #endif #if (SPEECH_RECO) #define MMI_SR_ENROLL_START_REQ ( ( P_AUDIO << 8 ) | 24 ) #define MMI_SR_ENROLL_STOP_REQ ( ( P_AUDIO << 8 ) | 25 ) #define MMI_SR_ENROLL_START_CON ( ( P_AUDIO << 8 ) | 26 ) #define MMI_SR_ENROLL_STOP_CON ( ( P_AUDIO << 8 ) | 27 ) #define MMI_SR_UPDATE_START_REQ ( ( P_AUDIO << 8 ) | 28 ) #define MMI_SR_UPDATE_STOP_REQ ( ( P_AUDIO << 8 ) | 29 ) #define MMI_SR_UPDATE_START_CON ( ( P_AUDIO << 8 ) | 30 ) #define MMI_SR_UPDATE_STOP_CON ( ( P_AUDIO << 8 ) | 31 ) #define MMI_SR_RECO_START_REQ ( ( P_AUDIO << 8 ) | 32 ) #define MMI_SR_RECO_STOP_REQ ( ( P_AUDIO << 8 ) | 33 ) #define MMI_SR_RECO_START_CON ( ( P_AUDIO << 8 ) | 34 ) #define MMI_SR_RECO_STOP_CON ( ( P_AUDIO << 8 ) | 35 ) #define MMI_SR_UPDATE_CHECK_START_REQ ( ( P_AUDIO << 8 ) | 36 ) #define MMI_SR_UPDATE_CHECK_STOP_REQ ( ( P_AUDIO << 8 ) | 37 ) #define MMI_SR_UPDATE_CHECK_START_CON ( ( P_AUDIO << 8 ) | 38 ) #define MMI_SR_UPDATE_CHECK_STOP_CON ( ( P_AUDIO << 8 ) | 39 ) #endif #if (AEC) #define MMI_AEC_REQ ( ( P_AUDIO << 8 ) | 40 ) #define MMI_AEC_CON ( ( P_AUDIO << 8 ) | 41 ) #endif #if (FIR) #define MMI_AUDIO_FIR_REQ ( ( P_AUDIO << 8 ) | 42 ) #define MMI_AUDIO_FIR_CON ( ( P_AUDIO << 8 ) | 43 ) #endif #if (AUDIO_MODE) #define MMI_AUDIO_MODE_REQ ( ( P_AUDIO << 8 ) | 44 ) #define MMI_AUDIO_MODE_CON ( ( P_AUDIO << 8 ) | 45 ) #endif #if (MELODY_E2) #define MMI_MELODY0_E2_START_REQ ( ( P_AUDIO << 8 ) | 46 ) #define MMI_MELODY0_E2_STOP_REQ ( ( P_AUDIO << 8 ) | 47 ) #define MMI_MELODY0_E2_START_CON ( ( P_AUDIO << 8 ) | 48 ) #define MMI_MELODY0_E2_STOP_CON ( ( P_AUDIO << 8 ) | 49 ) #define MMI_MELODY1_E2_START_REQ ( ( P_AUDIO << 8 ) | 50 ) #define MMI_MELODY1_E2_STOP_REQ ( ( P_AUDIO << 8 ) | 51 ) #define MMI_MELODY1_E2_START_CON ( ( P_AUDIO << 8 ) | 52 ) #define MMI_MELODY1_E2_STOP_CON ( ( P_AUDIO << 8 ) | 53 ) #endif #if (L1_VOICE_MEMO_AMR) #define MMI_VM_AMR_PLAY_START_REQ ( ( P_AUDIO << 8 ) | 54 ) #define MMI_VM_AMR_PLAY_STOP_REQ ( ( P_AUDIO << 8 ) | 55 ) #define MMI_VM_AMR_PLAY_START_CON ( ( P_AUDIO << 8 ) | 56 ) #define MMI_VM_AMR_PLAY_STOP_CON ( ( P_AUDIO << 8 ) | 57 ) #define MMI_VM_AMR_RECORD_START_REQ ( ( P_AUDIO << 8 ) | 58 ) #define MMI_VM_AMR_RECORD_STOP_REQ ( ( P_AUDIO << 8 ) | 59 ) #define MMI_VM_AMR_RECORD_START_CON ( ( P_AUDIO << 8 ) | 60 ) #define MMI_VM_AMR_RECORD_STOP_CON ( ( P_AUDIO << 8 ) | 61 ) #endif #if (L1_CPORT == 1) #define MMI_CPORT_CONFIGURE_REQ ( ( P_AUDIO << 8 ) | 62 ) #define MMI_CPORT_CONFIGURE_CON ( ( P_AUDIO << 8 ) | 63 ) #endif // Messages L1S -> L1A #if (KEYBEEP) #define L1_KEYBEEP_START_CON ( ( P_AUDIO << 8 ) | 64 ) #define L1_KEYBEEP_STOP_CON ( ( P_AUDIO << 8 ) | 65 ) #endif #if (TONE) #define L1_TONE_START_CON ( ( P_AUDIO << 8 ) | 66 ) #define L1_TONE_STOP_CON ( ( P_AUDIO << 8 ) | 67 ) #endif #if (MELODY_E1) #define L1_MELODY0_START_CON ( ( P_AUDIO << 8 ) | 68 ) #define L1_MELODY0_STOP_CON ( ( P_AUDIO << 8 ) | 69 ) #define L1_MELODY1_START_CON ( ( P_AUDIO << 8 ) | 70 ) #define L1_MELODY1_STOP_CON ( ( P_AUDIO << 8 ) | 71 ) #endif #if (VOICE_MEMO) #define L1_VM_PLAY_START_CON ( ( P_AUDIO << 8 ) | 72 ) #define L1_VM_PLAY_STOP_CON ( ( P_AUDIO << 8 ) | 73 ) #define L1_VM_RECORD_START_CON ( ( P_AUDIO << 8 ) | 74 ) #define L1_VM_RECORD_STOP_CON ( ( P_AUDIO << 8 ) | 75 ) #endif #if (SPEECH_RECO) #define L1_SR_ENROLL_START_CON ( ( P_AUDIO << 8 ) | 76 ) #define L1_SR_ENROLL_STOP_CON ( ( P_AUDIO << 8 ) | 77 ) #define L1_SR_UPDATE_START_CON ( ( P_AUDIO << 8 ) | 78 ) #define L1_SR_UPDATE_STOP_CON ( ( P_AUDIO << 8 ) | 79 ) #define L1_SR_RECO_START_CON ( ( P_AUDIO << 8 ) | 80 ) #define L1_SR_RECO_STOP_CON ( ( P_AUDIO << 8 ) | 81 ) #define L1_SR_RECO_STOP_IND ( ( P_AUDIO << 8 ) | 82 ) #define L1_SR_PROCESSING_STOP_CON ( ( P_AUDIO << 8 ) | 83 ) #endif #if (AEC) #define L1_AEC_CON ( ( P_AUDIO << 8 ) | 84 ) #define L1_AEC_IND ( ( P_AUDIO << 8 ) | 85 ) #endif #if (FIR) #define L1_AUDIO_FIR_CON ( ( P_AUDIO << 8 ) | 86 ) #endif #if (AUDIO_MODE) #define L1_AUDIO_MODE_CON ( ( P_AUDIO << 8 ) | 87 ) #endif #if (L1_VOICE_MEMO_AMR) #define L1_VM_AMR_PLAY_START_CON ( ( P_AUDIO << 8 ) | 88 ) #define L1_VM_AMR_PLAY_STOP_CON ( ( P_AUDIO << 8 ) | 89 ) #define L1_VM_AMR_RECORD_START_CON ( ( P_AUDIO << 8 ) | 90 ) #define L1_VM_AMR_RECORD_STOP_CON ( ( P_AUDIO << 8 ) | 91 ) #endif #if (L1_CPORT == 1) #define L1_CPORT_CONFIGURE_CON ( ( P_AUDIO << 8 ) | 92 ) #endif // Messages L1A <-> Audio background #if (SPEECH_RECO) #define L1_SRBACK_SAVE_DATA_REQ ( ( P_AUDIO << 8 ) | 93 ) #define L1_SRBACK_SAVE_DATA_CON ( ( P_AUDIO << 8 ) | 94 ) #define L1_SRBACK_LOAD_MODEL_REQ ( ( P_AUDIO << 8 ) | 95 ) #define L1_SRBACK_LOAD_MODEL_CON ( ( P_AUDIO << 8 ) | 96 ) #define L1_SRBACK_TEMP_SAVE_DATA_REQ ( ( P_AUDIO << 8 ) | 97 ) #define L1_SRBACK_TEMP_SAVE_DATA_CON ( ( P_AUDIO << 8 ) | 98 ) #endif #if (MELODY_E2) #define L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ ( ( P_AUDIO << 8 ) | 99 ) #define L1_BACK_MELODY_E2_LOAD_INSTRUMENT_CON ( ( P_AUDIO << 8 ) | 100 ) #define L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ ( ( P_AUDIO << 8 ) | 101 ) #define L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_CON ( ( P_AUDIO << 8 ) | 102 ) #define L1_MELODY0_E2_STOP_CON ( ( P_AUDIO << 8 ) | 103 ) #define L1_MELODY1_E2_STOP_CON ( ( P_AUDIO << 8 ) | 104 ) #endif #if (OP_RIV_AUDIO == 1) #if (L1_AUDIO_DRIVER == 1) #define L1_AUDIO_DRIVER_IND ( ( P_AUDIO << 8 ) | 105 ) #endif #endif #endif // AUDIO_TASK == 1