new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 *
 *        Filename ind_os.h
 *        Version  1.2
 *        Date     05/25/00
 * 
 ************* Revision Controle System Header *************/



#define OS_OK   0
        
typedef SYS_WORD16  T_OS_RETURN;

// Prototype for independant os commands
extern T_OS_RETURN  ind_os_sleep (SYS_UWORD32 millisecs);