FreeCalypso > hg > fc-magnetite
view src/cs/layer1/dl1/l1.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) SOURCE : L1.H | | AUTHOR : CONDAT GmbH (nn) VERSION: 01.00-01 | | CREATED : 03.06.96 STATE : code | +--------------------------------------------------------------------+ MODULE : L1 PURPOSE : Definitions for the Protocol Stack Entity Layer 1 */ #ifndef L1_H #define L1_H /*==== CONSTANTS ==================================================*/ #define DEBUG_PORT (2) #define DUART_PORT (DEBUG_PORT - 1) #define DEBUG_STACK_SIZE (1024) #define LOG_STACK_SIZE (1024) #define MONITOR_STACK_SIZE (1024) /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ void l1_create_ISR (void); void dl1_create_debug_task (void); void dt_assert(int _expr, char *s); void dt_error_message(char *s); void l1a_task(unsigned arcg, void *argv); unsigned get_arm_version (void); unsigned get_dsp_version (void); #endif