new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.

/*
 * The only DSP patch code we have for 36_10 is the dynamic download version
 * which we have extracted from the world's last surviving copy of TCS211 fw
 * for Calypso modems.  The purpose of this cheesy patch_file36_10.c wrapper
 * is to allow experimental builds with L1_DYN_DSP_DWNLD=0: we use the static
 * portion of our only available patch code, and simply not do the dynamic part.
 *
 * This configuration is intended only for experiments, not for production!
 * The dynamic parts of the DSP patch code which this configuration omits
 * are surely there for some good reason, and we can only guess what we are
 * going to destabilize by disabling them.
 */

#include "patch_file36_10_dyn_dwl.c"