FreeCalypso > hg > fc-magnetite
view src/cs/layer1/gtt_include/ctm/ctm_defines.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/* ******************************************************************************* * * COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH * 90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100 * * The program(s) may be used and/or copied only with the * written permission from Ericsson or in accordance * with the terms and conditions stipulated in the agreement or * contract under which the program(s) have been supplied. * ******************************************************************************* * * File : ctm_defines.h * Purpose : Global constants for the Cellular Text Telephone Modem * ******************************************************************************* */ #ifndef ctm_defines_h #define ctm_defines_h "$Id: $" #ifndef MAX #define MAX(A, B) ((A) > (B) ? (A) : (B)) #endif #define MAX_IDLE_SYMB 5 /* Number of Idle Symbols at End of Burst */ #define CHC_RATE 4 /* Rate of the Error Protection */ #define CHC_K 5 /* Constraint length of Error Protection */ #define SYMB_LEN 40 /* Length of one CTM symbol */ /* The following constant determines whether the signal processing takes */ /* place sample-by-sample or frame-by-frame (160 samples per frame) */ // #define LENGTH_TONE_VEC 160 /* signal frame size */ #define LENGTH_TONE_VEC 1 /* signal frame size */ /* Number of bits that are processed during each call of the main loop */ //LN March 13, 2002 //#define LENGTH_TX_BITS MAX(2, 2*LENGTH_TONE_VEC/SYMB_LEN) #define LENGTH_TX_BITS 2 //LN #define BITS_PER_SYMB 8 /* bits per symbol */ #define NCYCLES_0 2 /* Number of periods for symbol #0 */ #define NCYCLES_1 3 /* Number of periods for symbol #1 */ #define NCYCLES_2 4 /* Number of periods for symbol #2 */ #define NCYCLES_3 5 /* Number of periods for symbol #3 */ #define THRESHOLD_RELIABILITY_FOR_SUPPRESSING_OUTPUT 100 #define THRESHOLD_RELIABILITY_FOR_XCORR 1 #define THRESHOLD_RELIABILITY_FOR_GOING_OFFLINE 100 #define MAX_NUM_UNRELIABLE_GROSS_BITS 400 #define NUM_BITS_GUARD_INTERVAL 6 /* length of silence after a burst */ #define WAIT_SYNC_REL_THRESHOLD_0 20316 /* = 0.62*32768 */ #define WAIT_SYNC_REL_THRESHOLD_1 17039 /* = 0.52*32768 */ #define WAIT_SYNC_REL_THRESHOLD_2 23265 /* = 0.71*32768 */ #define RESYNC_REL_THRESHOLD 26542 /* = 0.81*32768 */ #define GUARD_BIT_SYMBOL 0 /* "magic number" indicating that a */ // /* bit shall be muted */ #define intlvB 8 /* Interleaver block length */ #define intlvD 2 /* Interleaver block distance (interlace) */ #define demodSyncLns 1 /* Nr of demodulator sync lines */ #define deintSyncLns 0 /* Nr of deinterleaver sync lines */ #define IDLE_SYMB 0x16 /* UCS code for Idle Symbol */ #define ENQU_SYMB 0x05 /* UCS code for Enquiry Symbol */ #if LENGTH_TONE_VEC==160 #define ENQUIRY_TIMEOUT 20 /* number of frames for negotiation */ #else #define ENQUIRY_TIMEOUT (1320/5) //19*160 #endif #define NUM_ENQUIRY_BURSTS 3 /* number of enquiry attempts */ #define NUM_MUTE_ROWS 4 /* duration of muting interval, 4 rows=80ms */ #define RESYNC_SEQ_LENGTH 32 /* must be a multiple of intlvB */ #define NUM_BITS_BETWEEN_RESYNC 352 // 352 = 320+32 /* 352 is a multiple of CHC_RATE, intlvB, and BITS_PER_SYMB, */ /* and must be greater than intlvB*((intlvB-1)*intlvD+NUM_MUTE_ROWS */ #define SILENCE_PERIOD 32 #define EARLY_SILENCE_PERIOD SILENCE_PERIOD-2 #define LATE_SILENCE_PERIOD SILENCE_PERIOD+2 #define PLAYBACK_VOLUME 0xC000 /* volume for sound card playback */ //#define DEBUG_OUTPUT /* comment this out for regular operation mode! */ #endif