FreeCalypso > hg > fc-magnetite

view src/cs/layer1/gtt_include/ctm/m_sequence.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*
*******************************************************************************
*
*      COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH
*      90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100
*
*      The program(s) may be used and/or copied only with the
*      written permission from Ericsson or in accordance
*      with the terms and conditions stipulated in the agreement or
*      contract under which the program(s) have been supplied.
*
*******************************************************************************
*
*      File             : m_sequence.h
*      Purpose          : Calculation of m-sequences 
*                         (maximum-length sequecnes or pseudo noise)
*
*******************************************************************************
*/

#ifndef m_sequence_h
#define m_sequence_h "$Id: $"

/*
*******************************************************************************
*                         INCLUDE FILES
*******************************************************************************
*/


/*
*******************************************************************************
*                         DECLARATION OF PROTOTYPES
*******************************************************************************
*/

/* -------------------------------------------------------------------- */
/* function m_sequence()                                                */
/* *********************                                                */
/* Calculates one period of an m-sequence (binary pseudo noise).        */
/* The sequence is stored in the vector sequence, which must have a     */
/* of (2^r)-1, where r is an integer number between 2 and 10.           */
/* Therefore, with this release of m_sequence, sequences of length      */
/* 3, 7, 15, 31, 63, 127, 255, 511, or 1023 can be generated.           */
/* The resulting sequence is bipolar, i.e. it has values -1 and +1.     */
/* -------------------------------------------------------------------- */

void m_sequence(WORD16 *sequence, WORD16 length);


#endif