view src/cs/layer1/gtt_include/ctm/tonemod.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*
*******************************************************************************
*
*      COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH
*      90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100
*
*      The program(s) may be used and/or copied only with the
*      written permission from Ericsson or in accordance
*      with the terms and conditions stipulated in the agreement or
*      contract under which the program(s) have been supplied.
*
*      Changes since October 13, 2000:
*      - The type mod_state_t includes a new member txbits_fifo_state now.
*
*******************************************************************************
*
*      File             : tonemod.h
*      Purpose          : header file for tonemod.c
*
*******************************************************************************
*/

#ifndef tonemod_h
#define tonemod_h "$Id: $"

/*
*******************************************************************************
*                         INCLUDE FILES
*******************************************************************************
*/

#include <fifo.h>

/*
*******************************************************************************
*                         DECLARATION OF PROTOTYPES
*******************************************************************************
*/


/* Define a type for the state variable of the function tonemod()     */

typedef struct {
  WORD16      cntModulatedSamples;
  WORD16      actualBits[2];
  fifo_state_t  txbits_fifo_state;
} mod_state_t;


/* ---------------------------------------------------------------------- */
/* Function init_tonemod()                                                */
/* ***********************                                                */
/* This function has to be executed before tonemod() can be used.         */
/* ---------------------------------------------------------------------- */

void init_tonemod(mod_state_t  *mod_state);


/* ---------------------------------------------------------------------- */
/* Function tonemod()                                                     */
/* ******************                                                     */
/* Modulator of the Cellular Text Telephone Modem.                        */
/* The input vector bits_in must contain the bits that have to be         */
/* transmitted. The length of bits_in must be even because always two     */
/* bits are coded in parallel.                                            */
/* Bits are either unipolar (i.e. {0, 1}) or bipolar (i.e. {-1, +1)}.     */
/* The length of the output vector tones_out must be 20 times longer than */
/* the length of bits_in, since each pair of two bits is coded within a   */
/* frame of 40 audio samples.                                             */
/* ---------------------------------------------------------------------- */

void tonemod(WORD16    *tones_out,
             WORD16    *bits_in,
             WORD16     num_samples_tones_out,
             WORD16     num_bits_in,
             mod_state_t *mod_state);

#endif