FreeCalypso > hg > fc-magnetite

view src/cs/layer1/include/l1_rtt_macro.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1_RTT_MACRO.H
 *
 *        Filename %M%
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#if (defined RVM_RTT_SWE || (OP_L1_STANDALONE == 1))

#include "rvt_gen.h"
#include "rtt_gen.h"

extern T_TRACE_INFO_STRUCT trace_info;
                                                                    
/***********************************************************************************************************/
/* Macro for cell enabling checking                                                                        */
/***********************************************************************************************************/

#define SELECTED_BITMAP(enable_bit) \
  enable_bit < 32  ? (0x0001 << (enable_bit -   0)) & trace_info.current_config->rttl1_cell_enable[0] : \
  enable_bit < 64  ? (0x0001 << (enable_bit -  32)) & trace_info.current_config->rttl1_cell_enable[1] : \
  enable_bit < 96  ? (0x0001 << (enable_bit -  64)) & trace_info.current_config->rttl1_cell_enable[2] : \
  enable_bit < 128 ? (0x0001 << (enable_bit -  96)) & trace_info.current_config->rttl1_cell_enable[3] : \
  enable_bit < 160 ? (0x0001 << (enable_bit - 128)) & trace_info.current_config->rttl1_cell_enable[4] : \
  enable_bit < 192 ? (0x0001 << (enable_bit - 160)) & trace_info.current_config->rttl1_cell_enable[5] : \
  enable_bit < 224 ? (0x0001 << (enable_bit - 192)) & trace_info.current_config->rttl1_cell_enable[6] : \
                     (0x0001 << (enable_bit - 224)) & trace_info.current_config->rttl1_cell_enable[7]

/***********************************************************************************************************/
/* Macros for buffer filling                                                                               */
/***********************************************************************************************************/

//-----------------------------------------------------------------------------------------------------------
// L1 RTT cell filling: FN
                                     
#define RTTL1_FILL_FN(param1) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_FN)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_FN))) != NULL) \
      { \
        ((T_RTTL1_FN *)ptr)->fn          = param1; \
        ((T_RTTL1_FN *)ptr)->cell_id     = RTTL1_ENABLE_FN; \
      } \
  }

//-----------------------------------------------------------------------------------------------------------
// L1 RTT cell filling: Downlink burst
                                     
#define RTTL1_FILL_DL_BURST(param1,param2,param3,param4,param5,param6,param7) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_BURST))                                                                  \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_BURST))) != NULL) \
      { \
        ((T_RTTL1_DL_BURST *)ptr)->angle       = param1; \
        ((T_RTTL1_DL_BURST *)ptr)->snr         = param2; \
        ((T_RTTL1_DL_BURST *)ptr)->afc         = param3; \
        ((T_RTTL1_DL_BURST *)ptr)->task        = param4; \
        ((T_RTTL1_DL_BURST *)ptr)->pm          = param5; \
        ((T_RTTL1_DL_BURST *)ptr)->toa         = param6; \
        ((T_RTTL1_DL_BURST *)ptr)->input_level = param7; \
        ((T_RTTL1_DL_BURST *)ptr)->cell_id     = RTTL1_ENABLE_DL_BURST; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink Normal Burst                                                                   
                                                                                                              
#define RTTL1_FILL_UL_NB(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_NB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_NB))) != NULL) \
      { \
        ((T_RTTL1_UL_NB *)ptr)->task    = param1; \
        ((T_RTTL1_UL_NB *)ptr)->ta      = param2; \
        ((T_RTTL1_UL_NB *)ptr)->txpwr   = param3; \
        ((T_RTTL1_UL_NB *)ptr)->cell_id = RTTL1_ENABLE_UL_NB; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink Access Burst                                                                   
                                                                                                              
#define RTTL1_FILL_UL_AB(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_AB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_AB))) != NULL) \
      { \
        ((T_RTTL1_UL_AB *)ptr)->task    = param1; \
        ((T_RTTL1_UL_AB *)ptr)->txpwr   = param2; \
        ((T_RTTL1_UL_AB *)ptr)->cell_id = RTTL1_ENABLE_UL_AB; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Full list measurement                                                                           
                                                                                                              
#define RTTL1_FILL_FULL_LIST_MEAS(param1, param2, param3, param4) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_FULL_LIST_MEAS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_FULL_LIST_MEAS))) != NULL) \
      {                                                                                                       \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->pm          = param1; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->input_level = param2; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->task        = param3; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->radio_freq  = param4; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->cell_id     = RTTL1_ENABLE_FULL_LIST_MEAS; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Full list measurement                                                                           
                                                                                                              
#define RTTL1_FILL_MON_MEAS(param1, param2, param3, param4) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MON_MEAS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MON_MEAS))) != NULL) \
      { \
        ((T_RTTL1_MON_MEAS *)ptr)->pm          = param1; \
        ((T_RTTL1_MON_MEAS *)ptr)->input_level = param2; \
        ((T_RTTL1_MON_MEAS *)ptr)->task        = param3; \
        ((T_RTTL1_MON_MEAS *)ptr)->radio_freq  = param4; \
        ((T_RTTL1_MON_MEAS *)ptr)->cell_id     = RTTL1_ENABLE_MON_MEAS; \
      } \
  }                                                                                                           

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink DCCH block                                                                   
                                                                                                              
#define RTTL1_FILL_DL_DCCH(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_DCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_DCCH))) != NULL) \
      { \
        ((T_RTTL1_DL_DCCH *)ptr)->valid_flag    = param1; \
        ((T_RTTL1_DL_DCCH *)ptr)->physical_info = param2; \
        ((T_RTTL1_DL_DCCH *)ptr)->cell_id       = RTTL1_ENABLE_DL_DCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink PTCCH block                                                                  
                                                                                                              
#define RTTL1_FILL_DL_PTCCH(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_PTCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_PTCCH))) != NULL) \
      { \
        ((T_RTTL1_DL_PTCCH *)ptr)->crc        = param1; \
        ((T_RTTL1_DL_PTCCH *)ptr)->ordered_ta = param2; \
        ((T_RTTL1_DL_PTCCH *)ptr)->cell_id    = RTTL1_ENABLE_DL_PTCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink DCCH block                                                                     
                                                                                                              
#define RTTL1_FILL_UL_DCCH \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_DCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_DCCH))) != NULL) \
      { \
        ((T_RTTL1_UL_DCCH *)ptr)->cell_id = RTTL1_ENABLE_UL_DCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink SACCH block                                                                    
                                                                                                              
#define RTTL1_FILL_UL_SACCH(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_SACCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_SACCH))) != NULL) \
      { \
        ((T_RTTL1_UL_SACCH *)ptr)->data_present   = param1; \
        ((T_RTTL1_UL_SACCH *)ptr)->reported_ta    = param2; \
        ((T_RTTL1_UL_SACCH *)ptr)->reported_txpwr = param3; \
        ((T_RTTL1_UL_SACCH *)ptr)->cell_id        = RTTL1_ENABLE_UL_SACCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink PDTCH block                                                                  
                                                                                                              
#define RTTL1_FILL_DL_PDTCH(param1, param2, param3, param4, param5) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_PDTCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_PDTCH))) != NULL) \
      { \
        ((T_RTTL1_DL_PDTCH *)ptr)->mac_header = param1; \
        ((T_RTTL1_DL_PDTCH *)ptr)->tfi_result = param2; \
        ((T_RTTL1_DL_PDTCH *)ptr)->crc        = param3; \
        ((T_RTTL1_DL_PDTCH *)ptr)->cs_type    = param4; \
        ((T_RTTL1_DL_PDTCH *)ptr)->timeslot   = param5; \
        ((T_RTTL1_DL_PDTCH *)ptr)->cell_id    = RTTL1_ENABLE_DL_PDTCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink PDTCH block                                                                    
                                                                                                              
#define RTTL1_FILL_UL_PDTCH(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_PDTCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_PDTCH))) != NULL) \
      { \
        ((T_RTTL1_UL_PDTCH *)ptr)->cs_type      = param1; \
        ((T_RTTL1_UL_PDTCH *)ptr)->data_allowed = param2; \
        ((T_RTTL1_UL_PDTCH *)ptr)->timeslot     = param3; \
        ((T_RTTL1_UL_PDTCH *)ptr)->cell_id      = RTTL1_ENABLE_UL_PDTCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: MAC-S error                                                                           
                                                                                                              
#define RTTL1_FILL_MACS_STATUS(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MACS_STATUS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MACS_STATUS))) != NULL) \
      { \
        ((T_RTTL1_MACS_STATUS *)ptr)->status   = param1; \
        ((T_RTTL1_MACS_STATUS *)ptr)->timeslot = param2; \
        ((T_RTTL1_MACS_STATUS *)ptr)->cell_id  = RTTL1_ENABLE_MACS_STATUS; \
      } \
  }

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: L1S task enable                                                                       
                                                                                                              
#define RTTL1_FILL_L1S_TASK_ENABLE(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_L1S_TASK_ENABLE)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_L1S_TASK_ENABLE))) != NULL) \
      { \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->bitmap1  = param1; \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->bitmap2  = param2; \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->cell_id  = RTTL1_ENABLE_L1S_TASK_ENABLE; \
      } \
  }

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: MFTAB trace                                                                       
                                                                                                              
#define RTTL1_FILL_MFTAB(param1) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MFTAB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MFTAB))) != NULL) \
      { \
        ((T_RTTL1_MFTAB *)ptr)->func     = param1; \
        ((T_RTTL1_MFTAB *)ptr)->cell_id  = RTTL1_ENABLE_MFTAB; \
      } \
  }

/***********************************************************************************************************/ 
/* Macro for events                                                                                        */ 
/***********************************************************************************************************/
                                                                                                              
#define RTTL1_EVENT(id,size) \
  if (trace_info.current_config->rttl1_event_enable & (0x1 << id)) \
    trace_info.l1s_rtt_func.rtt_dump_buffer(trace_info.l1s_trace_user_id, size);
#else // RVM_RTT_SWE || OP_L1_STANDALONE

// No RTT: all macros are empty
#define SELECTED_BITMAP(enable_bit) (0)                                   
#define RTTL1_FILL_FN(param1)                                      
#define RTTL1_FILL_DL_BURST(param1,param2,param3,param4,param5,param6,param7)                                                                                                               
#define RTTL1_FILL_UL_NB(param1, param2, param3)                                                                                                               
#define RTTL1_FILL_UL_AB(param1, param2)                                                                                                               
#define RTTL1_FILL_FULL_LIST_MEAS(param1, param2, param3, param4)                                                                                                               
#define RTTL1_FILL_MON_MEAS(param1, param2, param3, param4)                                                                                                               
#define RTTL1_FILL_DL_DCCH(param1, param2)                                                                                                               
#define RTTL1_FILL_DL_PTCCH(param1, param2)                                                                                                               
#define RTTL1_FILL_UL_DCCH                                                                                                               
#define RTTL1_FILL_UL_SACCH(param1, param2, param3)                                                                                                              
#define RTTL1_FILL_DL_PDTCH(param1, param2, param3, param4, param5)                                                                                                              
#define RTTL1_FILL_UL_PDTCH(param1, param2, param3)                                                                                                              
#define RTTL1_FILL_MACS_STATUS(param1, param2)                                                                                                              
#define RTTL1_FILL_L1S_TASK_ENABLE(param1, param2)                                                                                                              
#define RTTL1_FILL_MFTAB(param1)
#define RTTL1_EVENT(id,size)

#endif // RVM_RTT_SWE || OP_L1_STANDALONE