FreeCalypso > hg > fc-magnetite

view src/cs/layer1/tm_cust0/l1tm_tpu12.c @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents b870b6a44d31
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1TM_TPU2.C
 *
 *        Filename %M%
 *        Version  %I%
 *        Date     %G%
 * 
 ************* Revision Controle System Header *************/
#include "l1_confg.h"

#if (TESTMODE && (RF==12))

#include "tm_defs.h"
#include "l1_const.h"
#include "l1_types.h"

#include "l1tm_defty.h"
#include "l1tm_cust.h"
#include "l1tm_tpu12.h"

#if (AUDIO_TASK == 1)
  #include "l1audio_const.h"
  #include "l1audio_cust.h"
  #include "l1audio_defty.h"
#endif
////////////////////////////henry
#if (L1_GTT == 1)
  #include "l1gtt_const.h"
  #include "l1gtt_defty.h"
#endif
///////////////////////////  
#include "l1_defty.h"
#include "l1_msgty.h"
#include "l1_tabs.h"

#include "l1tm_msgty.h"
#include "l1tm_varex.h"

#if ((ANLG_FAM == 1) || (ANLG_FAM == 2))
  #include "spi_drv.h"
#endif   

#include "tpudrv12.h"
#include "l1_rf12.h"


#include <string.h>

// Import band configuration from Flash module (need to replace by an access function)


// External function prototypes


void Cust_tm_tpu_table_write        (T_TM_RETURN *tm_return, WORD8 index, UWORD8 size, UWORD8 table[])
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/

    // fill in the cid
    tm_return->cid = TPU_TABLE_WRITE;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

void Cust_tm_tpu_table_read         (T_TM_RETURN *tm_return, WORD8 index)
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/

    // fill in the cid
    tm_return->cid = TPU_TABLE_READ;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

#endif //TESTMODE