FreeCalypso > hg > fc-magnetite
view src/cs/layer1/tm_include/l1tm_signa.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1TM_SIGNA.H * * Filename l1tm_signa.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #define P_TMODE ( P_L1C + 3 ) // keep compatibility with GPRS code //TestMode #define TMODE_RXLEV_REQ ( ( P_TMODE << 8 ) | 1 ) #define TMODE_RXLEV_IND ( ( P_TMODE << 8 ) | 2 ) #define TMODE_STOP_RXLEV_CON ( ( P_TMODE << 8 ) | 3 ) #define TMODE_FB0_REQ ( ( P_TMODE << 8 ) | 4 ) #define TMODE_FB1_REQ ( ( P_TMODE << 8 ) | 5 ) #define TMODE_SB_REQ ( ( P_TMODE << 8 ) | 6 ) #define TMODE_FB_CON ( ( P_TMODE << 8 ) | 7 ) #define TMODE_SB_CON ( ( P_TMODE << 8 ) | 8 ) #define TMODE_BCCHS_CON ( ( P_TMODE << 8 ) | 9 ) #define TMODE_RA_START ( ( P_TMODE << 8 ) | 10 ) #define TMODE_RA_DONE ( ( P_TMODE << 8 ) | 11 ) #define TMODE_SCELL_NBCCH_REQ ( ( P_TMODE << 8 ) | 12 ) #define TMODE_STOP_SCELL_BCCH_REQ ( ( P_TMODE << 8 ) | 13 ) #define TMODE_NEW_SCELL_REQ ( ( P_TMODE << 8 ) | 14 ) #define TMODE_TCH_REQ ( ( P_TMODE << 8 ) | 15 ) #define TMODE_IMMED_ASSIGN_REQ ( ( P_TMODE << 8 ) | 16 ) #define TMODE_IMMED_ASSIGN_CON ( ( P_TMODE << 8 ) | 17 ) #define TMODE_STOP_RX_TX ( ( P_TMODE << 8 ) | 18 ) #define TMODE_SACCH_INFO ( ( P_TMODE << 8 ) | 19 ) #define TESTMODE_PRIM ( ( P_TMODE << 8 ) | 20 ) #define TMODE_FB_SB_REQ ( ( P_TMODE << 8 ) | 21 ) #define TMODE_NETWORK_SYNC_IND ( ( P_TMODE << 8 ) | 22 ) #define TMODE_TCH_INFO ( ( P_TMODE << 8 ) | 23 ) #if L1_GPRS #define TMODE_PDTCH_ASSIGN_REQ ( ( P_TMODE << 8 ) | 24 ) #define TMODE_PDTCH_INFO ( ( P_TMODE << 8 ) | 25 ) #endif // #define TMODE_RXLEV_REQ ( ( P_TMODE << 8 ) | 24 ) // #define TMODE_RXLEV_IND ( ( P_TMODE << 8 ) | 25 )