FreeCalypso > hg > fc-magnetite
view src/cs/layer1/tpu_drivers/source/makefile_p_pc @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
# Filename makefile_p_pc # Version 1.8 # Date 09/18/02 # # Makefile for GSM TPU drivers - PC version # # Copyright (c) Texas Instruments 1996 # # .SUFFIXES: .obj $(SUFFIXES) # Grab customer and rf id's #-------------------------- CUST=$(cust) RF=$(rf) CHIPSET=$(bsb) ANALOG=$(anl) DSP=$(dsp) BOARD=$(board) LONG_JUMP=$(ljump) TESTMODE=$(testmode) # Directories for PC system #---------------------------- ARMTOOLS =u:/470tools PTOOL_DIR =u:/ptool/tools INTRAM_DIR = u:/tools/INTRAM/TOOLS CL470_0 = $(ARMTOOLS)/cl470 CL470_1 = $(PTOOL_DIR)/pcl470 CL470_2 = $(PTOOL_DIR)/vcl470 CL470_3 = $(INTRAM_DIR)/icl470 $(PTOOL_DIR)/vcl470 CL470 = $(CL470_$(LONG_JUMP)) AR470 =$(ARMTOOLS)/ar470 ASM470 =$(ARMTOOLS)/asm470 # Source code path #----------------- SOURCE=../source$(CUST) PSOURCE=../p_source$(CUST) # Include file source paths #-------------------------- INCLUDE = \ -I../../nucleus/include \ -I../../include \ -I../../drivers1/common \ -I../source$(CUST) \ -I../../cust$(CUST) \ -I../../tm_include \ -I../p_source$(CUST) \ -I../../audio_include \ -I../../audio_cust$(CUST) \ -I../../hint DEPEND = $(SOURCE)/tpudrv$(RF).h \ ../../include/l1_time.h \ ../../drivers1/common/iq.h \ ../../cust$(CUST)/l1_rf$(RF).h \ tpudrv.h # Object files path #------------------ OBJ=$(SOURCE)/obj OBJS=obj_$(CHIPSET)_$(ANALOG) # EXECUTION TARGET #----------------- all: ../lib/tpudrv_$(CUST)_$(RF)_$(CHIPSET)_$(ANALOG)_$(DSP)_$(BOARD)_$(LONG_JUMP)_$(TESTMODE).lib clean: -rm obj/tpudrv.obj_$(ANALOG) $(OBJ)/tpudrv$(RF).obj_$(ANALOG)_$(BOARD) -rm ../lib/tpudrv_$(CUST)_$(RF)_$(ANALOG)_$(BOARD)_$(LONG_JUMP).lib # How to... #---------- #...generate the library #----------------------- ../lib/tpudrv_$(CUST)_$(RF)_$(CHIPSET)_$(ANALOG)_$(DSP)_$(BOARD)_$(LONG_JUMP)_$(TESTMODE).lib: obj/tpudrv.obj_$(CHIPSET)_$(ANALOG) $(OBJ)/tpudrv$(RF).obj $(OBJ)/p_tpudr$(RF).obj $(AR470) r $@ obj/tpudrv.obj_$(CHIPSET)_$(ANALOG) $(OBJ)/tpudrv$(RF).obj $(OBJ)/p_tpudr$(RF).obj #...generate the common object file #---------------------------------- obj/tpudrv.obj_$(CHIPSET)_$(ANALOG): $(DEPEND) tpudrv.c $(CL470) $(INCLUDE) -i$(ARMTOOLS) -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dLONG_JUMP=$(LONG_JUMP) -dTESTMODE=$(TESTMODE) -c -g -me -mt -mw -o2 -pw2 -fr obj -eo$(OBJS) tpudrv.c #...generate the target dependant object file #-------------------------------------------- $(OBJ)/tpudrv$(RF).obj: $(DEPEND) $(SOURCE)/tpudrv$(RF).c $(CL470) $(INCLUDE) -i$(ARMTOOLS) -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dBOARD=$(BOARD) -dLONG_JUMP=$(LONG_JUMP) -dTESTMODE=$(TESTMODE) -c -g -me -mt -mw -o2 -pw2 -fr$(OBJ) $(SOURCE)/tpudrv$(RF).c #...generate the target dependant GPRS object file #------------------------------------------------- $(OBJ)/p_tpudr$(RF).obj: $(DEPEND) $(PSOURCE)/p_tpudr$(RF).c $(CL470) $(INCLUDE) -i$(ARMTOOLS) -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dBOARD=$(BOARD) -dLONG_JUMP=$(LONG_JUMP) -c -g -me -mt -mw -o2 -pw2 -fr$(OBJ) $(PSOURCE)/p_tpudr$(RF).c