FreeCalypso > hg > fc-magnetite

view src/cs/riviera/rvm/rvm_ext_priorities.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source


/************************************************************************************* 
 *                                                                                   * 
 *  Name        rvm_ext_priorities.h                                                 * 
 *                                                                                   * 
 *  Function    this file priorities defintitions for basic SWEs			         * 
 *				It includes a file                                   *
 *                                                                                   * 
 *  Version		0.1															         * 
 *																			         * 
 * 	Date       	Modification												         * 
 *  ------------------------------------									         * 
 *  10/11/2000	Create														         * 
 *																			         * 
 *	Author		Cristian Livadiotti (c-livadiotti@ti.com)					         * 
 *																			         * 
 * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved         * 
 *                                                                                   *
 * --------------------------------------------------------------------------------- *
 *                                                                                   *
 *   History:                                                                        *
 *                                                                                   *
 *   10/18/2001 - Updated for R2D by Christophe Favergeon		                     * 
 *                                                                                   *
 *************************************************************************************/

#ifndef __RVM_EXT_PRIORITIES_H_
#define __RVM_EXT_PRIORITIES_H_

/* PRIORITIES SETTING:                        */
/* All user priority should be set under 250: */
/* Higher values are reserved                 */

/*
** External Priority definitions
** Note that RVM_EXPL_TASK_PRIORITY is used for testing purpose (refer to RTEST).
** Hence, users have to make sure that such a priority is lower than the software
** entity under test, not to starve the system.
*/
#define		RVM_EXPL_TASK_PRIORITY	(242)

#define		RVM_RGUI_TASK_PRIORITY	(240)
#define		RVM_R2D_TASK_PRIORITY	(239)


#define		RVM_DEV1_TASK_PRIORITY	(245)
#define		RVM_DEV2_TASK_PRIORITY	(245)
#define		RVM_DEV3_TASK_PRIORITY	(245)

#define		RVM_UVM_TASK_PRIORITY	(245)

#define		RVM_BTU_TASK_PRIORITY	(248) /* was 240 */
#define		RVM_BTUI_TASK_PRIORITY	(240)
#define		RVM_BTA_TASK_PRIORITY	(248) /* rl: was 200 */
#define		RVM_BTH_TASK_PRIORITY	(200)

#endif /* __RVM_EXT_PRIORITIES_H_ */