FreeCalypso > hg > fc-magnetite

view src/cs/riviera/rvm/rvm_pool_size.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/**
 * @file	rvm_pool_size.h
 *
 * Declarations of:
 * - the memory bank sizes and their watermark
 * - the SWE stack size
 * - the pool size needed (generally the sum of memory bank and stack sizes)
 *
 * @author	Vincent Oberle
 * @version 0.1
 */

/*
 * History:
 *
 *	Date       	Author					Modification
 *	-------------------------------------------------------------------
 *	07/08/2003	Vincent Oberle			Extracted from rvf_pool_size.h
 *	17/09/2003	Gary Totney			    Calibrated MB3 for 30 tasks
 *
 *
 * (C) Copyright 2003 by Texas Instruments Incorporated, All Rights Reserved
 */

#ifndef __RVM_POOL_SIZE_H_
#define __RVM_POOL_SIZE_H_


#ifndef _WINDOWS
  #include "rv.cfg"	     // TEST
  #include "debug.cfg" 	 // TI_PROFILER, TI_NUC_MONITOR
  #include "board.cfg"    // BOARD
  #include "swconfig.cfg" // GSMLITE
#endif

/*
 * RVM SWE; This SWE is of course always enabled.
 *
 * Values used in rvm_i.h
 */

#define RVF_RVM_STACK_SIZE (1500)

#if (defined BLUETOOTH) || (TEST==1) || (TI_PROFILER == 1) || (TI_NUC_MONITOR == 1)
  #define RVF_RVM_MB1_SIZE (13000)
#else
   #if (GSMLITE)
      #define RVF_RVM_MB1_SIZE  (1200)
   #else
      #define RVF_RVM_MB1_SIZE  (6000)
   #endif
#endif
#define RVF_RVM_MB2_SIZE    (700)

#if (GSMLITE)
   #define RVF_RVM_MB3_SIZE	(3200)
   #define RVF_RVM_MB4_SIZE	(0)
   #define RVF_RVM_MB5_SIZE	(0)
   #define RVF_RVM_COMPENSATOR_POOL_SIZE	(1000)
#else
   #define RVF_RVM_MB3_SIZE	(9000)
   #define RVF_RVM_MB4_SIZE	(3000)
   #define RVF_RVM_MB5_SIZE	(3000)
   #define RVF_RVM_COMPENSATOR_POOL_SIZE	(12500+3000)
#endif


#define RVF_RVM_POOL_SIZE  (RVF_RVM_STACK_SIZE + RVF_RVM_MB1_SIZE + \
                            RVF_RVM_MB2_SIZE + RVF_RVM_MB3_SIZE + \
                            RVF_RVM_MB4_SIZE + RVF_RVM_MB5_SIZE +\
                            RVF_RVM_COMPENSATOR_POOL_SIZE )



#endif /*__RVM_POOL_SIZE_H_*/