FreeCalypso > hg > fc-magnetite
view src/cs/riviera/rvt/rvt_def_i.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 6cea809631d7 |
children |
line wrap: on
line source
/******************************************************************************* * * rvt_def_i.h * * (C) Texas Instruments, all rights reserved * * Version number : 0.1 * * History : 0.1 (7/5/2000) - Created * * Date : 7/5/2000 * * Author : Guido Pagana g-pagana@ti.com * ******************************************************************************/ #ifndef __RVT_DEF_I_H__ #define __RVT_DEF_I_H__ #include "rvt/rvt_gen.h" #include "rvt/rvt_pool_size.h" /* Stack & Memory Bank sizes definitions */ /************************* Internal definitions **************************/ /* Define the maximum number of msg lost before sending an alert */ #define RVT_MAX_LOST_TRACE_MSG (1) /* Trace user database (must end using RVT_END_OF_TABLE) */ #define RVT_END_OF_TABLE {"", RVT_INVALID_HEADER, NULL} #define RVT_USER_ID_MAPPING { \ {"RV", RVT_RV_HEADER, NULL}, \ {"L1", RVT_L1_HEADER, NULL}, \ {"L23", RVT_L23_HEADER, NULL}, \ {"TM", RVT_TM_HEADER, NULL}, \ {"RNET", RVT_RNET_HEADER, NULL}, \ {"PROF", RVT_PROF_HEADER, NULL}, \ {"GTTBACK", RVT_GTTBACK_HEADER, NULL}, \ {"OTHER", RVT_OTHER_HEADER, NULL}, \ {"AT", RVT_AT_HEADER, NULL}, \ {"EXTUI", RVT_EXTUI_HEADER, NULL}, \ {"TCH", RVT_TCH_HEADER, NULL}, \ {"KEEPALIVE", RVT_KEEPALIVE_HEADER, NULL}, \ RVT_END_OF_TABLE \ } /* Trace task mailbox */ #define RVT_TRACE_MAILBOX RVF_TASK_MBOX_0 typedef struct { T_RVT_NAME user_name[RVT_NAME_MAX_LEN]; T_RVT_USER_ID user_id; RVT_CALLBACK_FUNC rx_callback_func; } T_RVT_USER_DB; /* Define the unique message type used in RVT */ #define RVT_TRACE_RQST_ID ( (RVT_USE_ID & 0xFFFF0000) | ( 0x1) | 0x001) typedef struct { T_RV_HDR header; T_RVT_USER_ID user_id; T_RVT_FORMAT format; T_RVT_MSG_LG msg_length; } T_RVT_TRACE_RQST; /* Trace message header size */ #define RVT_HEADER_SIZE (sizeof(T_RVT_TRACE_RQST) ) #define TRACE_TASK_STACK_SIZE TRACE_STACK_SIZE #define TRACE_MB_SIZE (TRACE_MB1_SIZE) #define TRACE_MB_WATERMARK (TRACE_MB_SIZE) /* Decimal to hexadecimal conversion table */ static const char Num2Char[] = {'0','1','2','3','4','5','6','7','8','9','A','B','C','D','E','F'}; /* ** Number of messages lost. Causes: ** ** __ 'Format' differs from RVT_ASCII_FORMAT and RVT_BINARY_FORMAT. ** | __ 'Message ID' differs from RVT_TRACE_RQST_ID. ** | | __ rvf_read_mbox has returned NULL. ** | | | __ Failed to send the message. ** | | | | __ Insufficient resources. ** | | | | | __ Trace Module not started. ** |_|_|_|_|_|____________________________________________________ ** | ¦ ¦ ¦ ¦ ¦ ¦ | | | | ** | ¦ ¦ ¦ ¦ ¦ ¦ | | | | ** |_¦_¦_¦_¦_¦_¦_._|_._._._._._._._|_._._._._._._._|_._._._._._._._| */ typedef union { struct { INT32 count : 26; INT32 not_started : 1; INT32 insufficient_resources : 1; INT32 message_not_sent : 1; INT32 message_empty : 1; INT32 unknown_request : 1; INT32 unknown_format : 1; } bit_mask; UINT32 overall_value; } T_RVT_LOST_MSG; extern T_RVT_LOST_MSG rvt_lost_msg_cpt; /* Prototypes */ BOOLEAN rvt_name_cmp( char * str1, char * str2); void rvt_activate_RX_HISR (void); void rvt_RX_process (void); #endif /* __RVT_DEF_I_H__ */