view src/cs/riviera/rvt/rvt_env_i.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*******************************************************************************
 *
 * rvt_env_i.h
 *
 * This file should be included by rvt_env.c ONLY!!!
 * It includes definitions of global variables used for trace.
 *
 * (C) Texas Instruments, all rights reserved
 *
 * Version number	: 0.11
 *
 * History			: 0.1  (7/4/2000) - Created
 *       			: 0.11 (6/13/2002) - Remove useless dependency.
 *
 * Date             : 6/13/2002
 *
 * Author           : Cristian Livadiotti, c-livadiotti@ti.com
 *
 ******************************************************************************/

#ifndef __RVT_ENV_I_H__
#define __RVT_ENV_I_H__


/*
** Environment global variables
*/
extern T_RVF_MB_ID    rvt_mb_id;
extern T_RVF_ADDR_ID  rvt_addr_id;


/*
** Trace Module State
*/
extern T_RVT_STATE    rvt_module_state;

extern char           *p_rvt_lost_msg;
extern char           *p_rvt_sys_time;
extern T_RVT_USER_DB  rvt_user_db [];
extern T_RVT_USER_ID  rv_trace_user_id;

#define RVT_LOST_MSG              ("RVT: Lost Message ")
#define RVT_LOST_MSG_LENGTH       (sizeof (RVT_LOST_MSG) - 1)

#define RVT_SYS_TIME              ("RVT: System Time ")
#define RVT_SYS_TIME_LENGTH       (sizeof (RVT_SYS_TIME) - 1)

#define RVT_HEX_VALUE_LENGTH      (sizeof ("00000000") - 1)

#ifndef FRAMING_PROTOCOL
	#define RVT_HYPERTERM_LENGTH  (sizeof ('\n') + sizeof ('\r'))
#else
	#define RVT_HDR_LENGTH        (6)
#endif

#endif