view src/cs/services/atp/Bti_at.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*******************************************************************************
 *
 * File Name : bti_at.h
 *
 * Common definition used by GSM PS and BT PS 
 *
 * (C) Texas Instruments, all rights reserved
 *
 * Version number	: 0.1      Date : 02-Jan-2001
 *
 ******************************************************************************/


#ifndef BTI_AT_H
#define BTI_AT_H



/* Acknowledgment */
typedef enum
{
  BTI_NAK   = 0, /* failure */
  BTI_ACK   = 1  /* success */
}T_BTI_ACK;

/* Port Number */
typedef unsigned char  T_BTI_PORT_NB;

/* Custom information provided by GSM when opening a port */
typedef struct 
{
	unsigned long optimal_gsm_max_packet_size; 
	// GSM indicates in this parameter the best maximum packet size that should be used by BT
	// 0 means do not care
} T_BTI_GSM_PORT_INFO; // Information provided by GSM related to the port 


/* Custom information provided by BT when opening a port */
typedef struct 
{
	unsigned long optimal_bt_max_packet_size;
	// BT indicates in this parameter the best maximum packet size that should be used by GSM
	// 0 means do not care
} T_BTI_BT_PORT_INFO; // Information provided by BT related to the port

/* Ring type */
typedef enum
{
  BTI_AT_RING_NotPresent, /* no bearer cap available */
  BTI_AT_RING_Async, /* transparent data */
  BTI_AT_RING_Sync, /* currently not used */
  BTI_AT_RING_RelAsync, /* non transparent data */
  BTI_AT_RING_RelSync, /* currently not used */
  BTI_AT_RING_Fax,
  BTI_AT_RING_Voice,
  BTI_AT_RING_AuxVoice,
  BTI_AT_RING_GPRS
}T_BTI_AT_RING_TYPE;

/* Line status information from DCE (ie GSM) */
typedef unsigned char  T_BTI_AT_DCE_SIGNAL;
#define BTI_AT_RING_OFF (0)
#define BTI_AT_RING_ON (1)
#define BTI_AT_RING_MASK (1)
#define BTI_AT_DCD_OFF (0)
#define BTI_AT_DCD_ON (2)
#define BTI_AT_DCD_MASK (2)

#endif