FreeCalypso > hg > fc-magnetite
view src/cs/services/atp/atp_pool_size.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/** * @file atp_pool_size.h * * Declarations of: * - the memory bank sizes and their watermark * - the SWE stack size * - the pool size needed (generally the sum of memory bank and stack sizes) * * @author Vincent Oberle * @version 0.1 */ /* * History: * * Date Author Modification * ------------------------------------------------------------------- * 07/08/2003 Vincent Oberle Extracted from rvf_pool_size.h * * (C) Copyright 2003 by Texas Instruments Incorporated, All Rights Reserved */ #ifndef __ATP_POOL_SIZE_H_ #define __ATP_POOL_SIZE_H_ /* * Values used in atp_config.h */ #define ATP_MB1_SIZE (5000) #define ATP_POOL_SIZE (ATP_MB1_SIZE) /* * Values used in atp_uart_env.h */ #define ATP_UART_STACK_SIZE (1024) #define ATP_UART_MB1_SIZE (1024) #define ATP_UART_POOL_SIZE (ATP_UART_STACK_SIZE + ATP_UART_MB1_SIZE) #endif /*__ATP_POOL_SIZE_H_*/