view src/cs/services/audio/audio_ffs_i.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 838eeafb0051
children
line wrap: on
line source

/********************************************************************************/
/*                                                                              */
/*    File Name:   audio_ffs_i.h                                                */
/*                                                                              */
/*    Purpose:     This header contains the audio ffs constants related to      */
/*                 the ffs behavior.                                            */
/*                                                                              */
/*    Note:                                                                     */
/*        None.                                                                 */
/*                                                                              */
/*    Revision History:                                                         */
/*       11 May 01     Francois Mazard - Stephanie Gerthoux        Create       */
/*                                                                              */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved.   */
/*                                                                              */
/********************************************************************************/
  #ifndef _AUDIO_FFS_I_H_
    #define _AUDIO_FFS_I_H_

    #ifdef __cplusplus
      extern "C"
      {
    #endif

      #define AUDIO_MEM_MAX_CHANNEL            (1)
      #define AUDIO_VM_AMR_PLAY_SIZE           (500)// 16 bit unit
      #define AUDIO_VM_AMR_PLAY_NB_BUFFER      (2)
      #define AUDIO_VM_AMR_RECORD_SIZE         (500)// 16 bit unit
      #define AUDIO_VM_AMR_RECORD_NB_BUFFER    (2)      
      #define AUDIO_MIDI_SIZE                  (500) // 16 bit unit
      #define AUDIO_MIDI_NB_BUFFER             (2)

      #if (MELODY_E1) || (MELODY_E2) || (VOICE_MEMO)
        /* maximum number of FFS channel */
        #define AUDIO_FFS_MAX_CHANNEL             (2)

        /* list of the session_id depending on the audio features */
        /* session id of the melody E1 number 0 */
        #define AUDIO_FFS_SESSION_MELODY_E1_0     (0)
        /* session id of the melody E1 number 1 */
        #define AUDIO_FFS_SESSION_MELODY_E1_1     (1)
        /* session id of the melody E2 number 0 */
        #define AUDIO_FFS_SESSION_MELODY_E2_0     (2)
        /* session id of the melody E2 number 1 */
        #define AUDIO_FFS_SESSION_MELODY_E2_1     (3)

        /* session id of the voice memo play */
        #define AUDIO_FFS_SESSION_VM_PLAY         (4)
        /* session id ofthe voice memo record */
        #define AUDIO_FFS_SESSION_VM_RECORD       (5)
        /* size of the data to download to the RAM for each features */
        /* using the FLASH to RAM session*/
        #define AUDIO_MELODY_E1_SIZE              (512)
        #define AUDIO_MELODY_E2_SIZE              (512)
        #define AUDIO_VM_PLAY_SIZE                (1024)
        /* size to allocate in RAM for each features */
        /* using the RAM to FLASH session */
        #define AUDIO_VM_RECORD_INITIAL_SIZE      (1024)

        /* maximum number of buffer per session */
        #define AUDIO_MAX_FFS_BUFFER_PER_SESSION  (2)

        /* The audio FFS is activated: the audio task run with a time out */
        #ifndef _WINDOWS
          #define AUDIO_FFS_TIME_OUT                (RVF_MS_TO_TICKS(500))
        #else
          #define AUDIO_FFS_TIME_OUT                (RVF_MS_TO_TICKS(10))
        #endif


        /* The audio FFS manager need to be activate asap */
        #define AUDIO_FFS_ACTIVE_NOW              (0)

        /* The audio FFS timer is in one shot mode */
        #define AUDIO_FFS_ONE_SHOT_TIMER          (FALSE)

        /* The audio FFS timer is in continuous mode */
        #define AUDIO_FFS_CONTINUOUS_TIMER        (TRUE)

        /* state of the cust_get_pointer state machine */
        #define  AUDIO_CUST_GET_POINTER_INIT      (0)
        #define  AUDIO_CUST_GET_POINTER_NORMAL    (1)
        #define  AUDIO_CUST_GET_POINTER_LOOP      (2)
      #endif /* MELODY_E1 || MELODY_E2 || VOICE_MEMO */

    #ifdef __cplusplus
      }
    #endif
  #endif /* _AUDIO_FFS_I_ */