FreeCalypso > hg > fc-magnetite

view src/cs/services/audio/audio_mode.c @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 838eeafb0051
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  File Name:  audio_mode.c                                                */
/*                                                                          */
/*  Purpose:  This file contains all the functions used for audio mode misc */
/*            services.                                                     */
/*                                                                          */
/*  Version   0.1                                                           */
/*                                                                          */
/*  Date        Modification                                                */
/*  ------------------------------------------------------------------------*/
/*  14 Jan 2002  Create                                                     */
/*                                                                          */
/*  Author      Francois Mazard                                             */
/*                                                                          */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#include "rv/rv_defined_swe.h"

#ifdef RVM_AUDIO_MAIN_SWE
  #ifndef _WINDOWS
    #include "config/swconfig.cfg"
    #include "config/sys.cfg"
    #include "config/chipset.cfg"
  #endif

  #include "l1_confg.h"
  #include "rv/rv_general.h"
  #include "rvm/rvm_gen.h"
  #include "audio/audio_ffs_i.h"
  #include "audio/audio_api.h"
  #include "audio/audio_structs_i.h"
  #include "audio/audio_error_hdlr_i.h"
  #include "audio/audio_var_i.h"
  #include "audio/audio_messages_i.h"
  #include "audio/audio_macro_i.h"
  #include "rvf/rvf_target.h"
  #include "audio/audio_const_i.h"

  /* include the usefull L1 header */
  #ifdef _WINDOWS
    #define BOOL_FLAG
    //#define CHAR_FLAG
  #endif
  #include "l1_types.h"
  #include "l1audio_const.h"
  #include "l1audio_cust.h"
  #include "l1audio_defty.h"
  #include "l1audio_msgty.h"
  #include "l1audio_signa.h"
  #if TESTMODE
   #include "l1tm_defty.h"
  #endif
  #if (L1_GTT == 1)
    #include "l1gtt_const.h"
    #include "l1gtt_defty.h"
  #endif
  #include "l1_const.h"
  #include "l1_defty.h"
  #include "l1_msgty.h"
  #include "l1_signa.h"
  #ifdef _WINDOWS
    #define L1_ASYNC_C
  #endif
  #include "l1_varex.h"

  /* external functions */
  extern void audio_mode_full_access_write_send_status (T_AUDIO_RET status, T_RV_RETURN return_path);
  extern void audio_mode_load_send_status              (T_AUDIO_RET status, T_RV_RETURN return_path);
  extern void audio_mode_save_send_status              (T_AUDIO_RET status, T_RV_RETURN return_path);
  extern void audio_mode_speaker_volume_send_status    (T_AUDIO_RET status, T_RV_RETURN return_path);

  /********************************************************************************/
  /*                                                                              */
  /*    Function Name:   audio_mode_message_switch                                */
  /*                                                                              */
  /*    Purpose:  This function manages the dispatching of the message usefull    */
  /*              for audio mode services.                                        */
  /*                                                                              */
  /*    Input Parameters:                                                         */
  /*        Audio message.                                                        */
  /*                                                                              */
  /*    Output Parameters:                                                        */
  /*        ID of the message receptor.                                           */
  /*                                                                              */
  /*    Note:                                                                     */
  /*        None.                                                                 */
  /*                                                                              */
  /*    Revision History:                                                         */
  /*        None.                                                                 */
  /*                                                                              */
  /********************************************************************************/
  UINT8 audio_mode_message_switch(T_RV_HDR *p_message)
  {
    switch(p_message->msg_id)
    {
      case AUDIO_MODE_LOAD_REQ :
      {
        if ( (p_audio_gbl_var->audio_mode_var.audio_mode_load_var.state != AUDIO_MODE_LOAD_IDLE) ||
             (p_audio_gbl_var->audio_mode_var.full_access_write_var.state != AUDIO_MODE_FULL_WRITE_IDLE) )
        {
          AUDIO_SEND_TRACE("AUDIO MODE LOAD: an entity already uses this service", RV_TRACE_LEVEL_ERROR);
          audio_mode_load_send_status (AUDIO_ERROR, ((T_AUDIO_MODE_LOAD_REQ *)p_message)->return_path);
          p_audio_gbl_var->message_processed = TRUE;
          return (AUDIO_MODE_NONE);
        }
        return(AUDIO_MODE_LOAD);
        break;
      }
      case AUDIO_MODE_SAVE_REQ :
      {
        if ( (p_audio_gbl_var->audio_mode_var.audio_mode_load_var.state != AUDIO_MODE_LOAD_IDLE) ||
             (p_audio_gbl_var->audio_mode_var.full_access_write_var.state != AUDIO_MODE_FULL_WRITE_IDLE) )
        {
          AUDIO_SEND_TRACE("AUDIO MODE SAVE: an entity currently changes the audio mode", RV_TRACE_LEVEL_ERROR);
          audio_mode_save_send_status (AUDIO_ERROR, ((T_AUDIO_MODE_SAVE_REQ *)p_message)->return_path);
          p_audio_gbl_var->message_processed = TRUE;
          return (AUDIO_MODE_NONE);
        }
        return(AUDIO_MODE_SAVE);
        break;
      }
      case AUDIO_MODE_WRITE_REQ :
      {
        if ( (p_audio_gbl_var->audio_mode_var.audio_mode_load_var.state != AUDIO_MODE_LOAD_IDLE) ||
             (p_audio_gbl_var->audio_mode_var.full_access_write_var.state != AUDIO_MODE_FULL_WRITE_IDLE) )
        {
          AUDIO_SEND_TRACE("AUDIO MODE FULL ACCESS WRITE: an entity currently changes the audio mode", RV_TRACE_LEVEL_ERROR);
          audio_mode_full_access_write_send_status (AUDIO_ERROR,
            ((T_AUDIO_MODE_FULL_ACCESS_WRITE_REQ *)p_message)->return_path);
          p_audio_gbl_var->message_processed = TRUE;
          return (AUDIO_MODE_NONE);
        }
        return(AUDIO_FULL_ACCESS_WRITE);
        break;
      }
      case OML1_START_DAI_TEST_CON :
      case OML1_STOP_DAI_TEST_CON :
      #if (AUDIO_MODE)
        case MMI_AUDIO_MODE_CON :
      #endif
      #if (FIR)
        case MMI_AUDIO_FIR_CON :
      #endif
      case MMI_AEC_CON :
      {
        if (p_audio_gbl_var->audio_mode_var.audio_mode_load_var.state != AUDIO_MODE_LOAD_IDLE)
        {
          return(AUDIO_MODE_LOAD);
        }
        else
        if (p_audio_gbl_var->audio_mode_var.full_access_write_var.state != AUDIO_MODE_FULL_WRITE_IDLE)
        {
          return(AUDIO_FULL_ACCESS_WRITE);
        }
        break;
      }
      case AUDIO_SPEAKER_VOLUME_REQ:
      {
        if ( (p_audio_gbl_var->audio_mode_var.audio_mode_load_var.state != AUDIO_MODE_LOAD_IDLE) ||
             (p_audio_gbl_var->audio_mode_var.full_access_write_var.state != AUDIO_MODE_FULL_WRITE_IDLE) )
        {
          AUDIO_SEND_TRACE("AUDIO MODE SPEAKER VOLUME: an entity currently changes the audio mode", RV_TRACE_LEVEL_ERROR);
          audio_mode_speaker_volume_send_status (AUDIO_ERROR,
            ((T_AUDIO_SPEAKER_VOLUME_REQ *)p_message)->return_path);
          p_audio_gbl_var->message_processed = TRUE;
          return (AUDIO_MODE_NONE);
        }
        return(AUDIO_SPEAKER_VOLUME);
        break;
      }
    }
    return (AUDIO_MODE_NONE);
  }
#endif /*RVM_AUDIO_MAIN_SWE*/