view src/cs/services/audio/audio_vm_amr.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 838eeafb0051
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  File Name:  audio_vm_amr.c		                                        */
/*                                                                          */
/*  Purpose:  This file contains all the functions used to manage the       */
/*            Voice Memorization AMR.                                       */
/*                                                                          */
/*  Version   0.1                                                           */
/*                                                                          */
/*  Date        Modification                                                */
/*  ------------------------------------                                    */
/*  2 November 2002 Create                                                  */
/*                                                                          */
/*  Author                                                                  */
/*     Frederic Turgis                                                      */
/*                                                                          */
/* (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#include "rv/rv_defined_swe.h"
#ifdef RVM_AUDIO_MAIN_SWE
#ifndef _WINDOWS
    #include "config/swconfig.cfg"
    #include "config/sys.cfg"
    #include "config/chipset.cfg"
  #endif

  /* include the usefull L1 header */
  #include "l1_confg.h"

#if (L1_VOICE_MEMO_AMR)
  #include "rv/rv_general.h"
  #include "rvm/rvm_gen.h"
  #include "audio/audio_features_i.h"
  #include "audio/audio_ffs_i.h"
  #include "audio/audio_api.h"
  #include "audio/audio_structs_i.h"
  #include "audio/audio_var_i.h"
  #include "audio/audio_messages_i.h"
  #include "rvf/rvf_target.h"
  #include "audio/audio_const_i.h"
  #include "audio/audio_error_hdlr_i.h"

  /* include the usefull L1 header */
  #define BOOL_FLAG
  #define CHAR_FLAG
  #include "l1_types.h"
  #include "l1audio_cust.h"
  #include "l1audio_msgty.h"
  #include "l1audio_signa.h"

  /********************************************************************************/
  /*                                                                              */
  /*    Function Name:   audio_voice_memo_amr_message_switch	                  */
  /*                                                                              */
  /*    Purpose:  Manage the message supply between the voice memo play and the   */
  /*              voice memo record AMR                                           */
  /*                                                                              */
  /*    Input Parameters:                                                         */
  /*        start or stop message from the voice memo features                    */
  /*                                                                              */
  /*    Output Parameters:                                                        */
  /*        index of the manager                                                  */
  /*                                                                              */
  /*    Note:                                                                     */
  /*        None.                                                                 */
  /*                                                                              */
  /*    Revision History:                                                         */
  /*        None.                                                                 */
  /*                                                                              */
  /********************************************************************************/
#if (AUDIO_MEM_MANAGER)
  UINT8 audio_voice_memo_amr_memory_message_switch (T_RV_HDR *p_message)
  {
    switch (p_message->msg_id)
    {
    #if(AUDIO_NEW_FFS_MANAGER)
      case AUDIO_VM_AMR_RECORD_TO_FFS_START_REQ:
      case AUDIO_VM_AMR_RECORD_TO_FFS_STOP_REQ:
      {
        return(AUDIO_VM_AMR_RECORD);
      }
      break;
    #endif
    #if(AUDIO_RAM_MANAGER)
      case AUDIO_VM_AMR_RECORD_TO_RAM_START_REQ:
      case AUDIO_VM_AMR_RECORD_TO_RAM_STOP_REQ:
      {
        return(AUDIO_VM_AMR_RECORD);
      }
      break;
    #endif
    #if (AUDIO_NEW_FFS_MANAGER)
      case AUDIO_VM_AMR_PLAY_FROM_FFS_START_REQ:
      case AUDIO_VM_AMR_PLAY_FROM_FFS_STOP_REQ:
      {
        return(AUDIO_VM_AMR_PLAY);
      }
      break;
    #endif
    #if (AUDIO_RAM_MANAGER)
      case AUDIO_VM_AMR_PLAY_FROM_RAM_START_REQ:
      case AUDIO_VM_AMR_PLAY_FROM_RAM_STOP_REQ:
      {
        return(AUDIO_VM_AMR_PLAY);
      }
      break;
    #endif
    #if (AUDIO_MEM_MANAGER)
      /* check channel_id is the one given by driver initialization*/
      case AUDIO_MEM_STATUS_MSG:
      {
        /* check VM AMR is active for the given channel_id */
        if ((p_audio_gbl_var->audio_vm_amr_record.state != AUDIO_IDLE) &&
            ( ((T_AUDIO_MEM_STATUS *)p_message)->channel_id == p_audio_gbl_var->audio_vm_amr_record.channel_id))
          return(AUDIO_VM_AMR_RECORD);

        if ((p_audio_gbl_var->audio_vm_amr_play.state != AUDIO_IDLE) &&
            ( ((T_AUDIO_MEM_STATUS *)p_message)->channel_id == p_audio_gbl_var->audio_vm_amr_play.channel_id))
          return(AUDIO_VM_AMR_PLAY);

        return(AUDIO_VM_AMR_NONE);
      }
      break;
    #endif
      /* driver init => check session_id is VM AMR */
      case AUDIO_DRIVER_INIT_STATUS_MSG:
      {
        UINT8 session_id = ((T_AUDIO_DRIVER_INIT_STATUS *)p_message)->session_id;

        /* session_id is VM AMR */
        if ( (session_id == AUDIO_VM_AMR_PLAY_SESSION_ID)&&
             (p_audio_gbl_var->audio_vm_amr_play.state != AUDIO_IDLE))
        {
          return (AUDIO_VM_AMR_PLAY);
        }

        if ( (session_id == AUDIO_VM_AMR_RECORD_SESSION_ID)&&
             (p_audio_gbl_var->audio_vm_amr_record.state != AUDIO_IDLE))
        {
          return (AUDIO_VM_AMR_RECORD);
        }

        return(AUDIO_VM_AMR_NONE);
      }
      break;

      default:
        return(AUDIO_VM_AMR_NONE);
      break;
    } /* switch */
  }
#endif // #if (AUDIO_MEM_MANAGER)

#endif /* L1_VOICE_MEMO_AMR */
#endif /* RVM_AUDIO_MAIN_SWE */