view src/cs/services/dar/dar_api.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  File Name:  dar_api.h                                                   */
/*                                                                          */
/*  Purpose:  This file contains data structures and functions prototypes   */
/*            used to send events to the DAR SWE.                           */
/*                                                                          */
/*  Version   0.1                                                           */
/*                                                                          */
/*  Date                Modification                                        */
/*  ------------------------------------                                    */
/*  26 September 2001   Create                                              */
/*                                                                          */
/*  Author       Stephanie Gerthoux                                         */
/*                                                                          */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#include "rv/rv_defined_swe.h"
#include "rvm/rvm_api.h"

/* file used in recovery case */
#include "main/sys_types.h" 

#include "dar/dar_gen.h"

#ifdef RVM_DAR_SWE

   #ifndef __DAR_API_H_
      #define __DAR_API_H_

      #ifdef __cplusplus
         extern "C"
            {
      #endif

      /***** Events   *****/
      #define DAR_EVENTS_MASK                                  (0x5000)
      #define DAR_EVENT_EXTERN                                 (0x0C00)

      /***** Definitions *****/
      /*Define DAR use parameters */ 
      typedef struct
      { 
         UINT16 group_nb;
         UINT16 mask;
      }T_DAR_USE_ID;

      typedef struct
      {
         T_RV_HDR   os_hdr;
         INT8       status;
      } T_DAR_STATUS;

      /********************************************************************************/
      /*                               RECOVERY                                       */
      /********************************************************************************/

      /***** Events   *****/
      #define DAR_RECOVERY_CONFIG                            (0x0001|DAR_EVENT_EXTERN)
   
      /***** Definitions ******/
      /* Define return parameters. */
      typedef UINT16 T_DAR_RECOVERY_STATUS;
      /* possible values */
      #define DAR_POWER_ON_OFF            (0x0)       /* Power ON/OFF */
      #define DAR_WATCHDOG                (0xDD11)    /* Watchdog reset */
      #define DAR_NORMAL_SCUTTLING        (0xDD22)    /* Recovery module has decided to active the reset */
      #define DAR_EMERGENCY_SCUTTLING     (0xDD33)    /* Emergency detection */

      /* Define Recovery configuration parameters */
      typedef struct{
         UINT16            msg_id;          /* id of the message     */
         T_DAR_BUFFER      buffer_p;        /* pointer on the buffer */
         UINT8             length;          /* buffer length         */
      } T_DAR_RECOVERY_CONFIG;

      /* Define register parameters */
      #define DAR_NAME_MAX_LEN		(15)
      typedef char T_DAR_NAME[DAR_NAME_MAX_LEN];

      /***** Prototype *****/
      /* Get and reset the status of the DAR entity */
      T_RV_RET dar_recovery_get_status(T_DAR_RECOVERY_STATUS* status);
      T_RV_RET dar_recovery_config(T_RV_RET (*dar_store_recovery_data)( T_DAR_BUFFER buffer_p,
                                                                        UINT16 length));
      T_RV_RET dar_get_recovery_data(T_DAR_BUFFER buffer_p,UINT16 length );                                                         

     /********************************************************************************/
     /*                               WATCHDOG                                       */
     /********************************************************************************/
    
     /***** Prototype *****/
     T_RV_RET  dar_start_watchdog_timer(UINT16 timer);
     T_RV_RET  dar_reload_watchdog_timer(void);
     T_RV_RET  dar_stop_watchdog_timer(void);


     /********************************************************************************/
     /*                                RESET                                         */
     /********************************************************************************/
    
     /***** Prototype *****/
     T_RV_RET  dar_reset_system(void);


     /********************************************************************************/
     /*                              DIAGNOSE                                        */
     /********************************************************************************/

     /***** Definitions *****/

     /* DAR level messages value ( Error, Warning or debug )  */
     /*   define with 8 bits: - the first for Error level     */
     /*                       - the second for Warning level  */
     /*                       - the other bits for debug level*/

     /* Error level :    1000 0000 in binary*/
     #define DAR_ERROR                               (0x80)
     /* Warning level :  0100 0000 in binary*/
     #define DAR_WARNING                             (0x40)
     /* Debug level :    0000 0001 in binary*/
     #define DAR_DEBUG                               (0x01)
     /* None level :     0000 0000 in binary*/
     #define DAR_NO_DIAGNOSE                         (0x00)
     /* Exception level  1111 1111 in binary*/
     #define DAR_EXCEPTION                           (0xFF)
     /* Causes a reset, if set when calling dar_diagnose_write_emergency() */
     #define DAR_EMERGENCY_RESET               (0x00000001)
     /* New data is appended to last entry, if set when calling dar_diagnose_write_emergency() */
     #define DAR_NEW_ENTRY                     (0x00000002)

     /***** Prototype *****/
     /* Diagnose prototypes */
     T_RV_RET dar_diagnose_swe_filter (  T_RVM_USE_ID  dar_use_id, 
                                         T_DAR_LEVEL    dar_level);

     T_RV_RET dar_diagnose_write(  T_DAR_INFO    *buffer_p,
                                   T_DAR_FORMAT  format,
                                   T_DAR_LEVEL   diagnose_info_level,
                                   T_RVM_USE_ID  dar_use_id);

     T_RV_RET dar_diagnose_write_emergency(  T_DAR_INFO    *buffer_p,
                                             T_DAR_FORMAT  format,
                                             T_RVM_USE_ID  dar_use_id,
                                             UINT32 flags);

     T_RV_RET dar_diagnose_generate_emergency(  T_DAR_INFO    *buffer_p,
                                                T_DAR_FORMAT  format,
                                                T_RVM_USE_ID  dar_use_id);
  
     #ifdef __cplusplus
       } 
     #endif

   #endif /* __DAR_API_H_ */
#endif /* #ifdef RVM_DAR_SWE */