FreeCalypso > hg > fc-magnetite
view src/cs/services/dar/tests/dar_test_misc.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/********************************************************************************/ /* */ /* File Name: dar_test_misc.c */ /* */ /* Purpose: This file gathers misc tests for DAR. */ /* */ /* Note: None. */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ---------------------------------------------------------------------------*/ /* 5 November 2001 Create */ /* */ /* Author Stephanie Gerthoux */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved */ /********************************************************************************/ /********************************************************************************/ /* */ /* Include files used for DAR riviera testing. */ /* */ /********************************************************************************/ #include "rv/rv_defined_swe.h" #include "dar/tests/dar_test.h" #ifdef RVM_DAR_SWE #if (DAR_MISC == SW_COMPILED) #include "rv/rv_general.h" #include "rvm/rvm_gen.h" #include "dar/tests/dar_test_regr.h" #include "dar/tests/dar_test_misc.h" #include "dar/dar_api.h" #include "dar/dar_structs_i.h" #include "dar/dar_messages_i.h" #include "rvf/rvf_target.h" #include "dar/dar_const_i.h" #include "dar/dar_error_hdlr_i.h" #include "dar/dar_macro_i.h" /********************************************************************************/ /* */ /* Function Name: dar_test_misc */ /* */ /* Purpose: This function executes the DAR misc tests. */ /* */ /* Input Parameters: */ /* test number. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 5 November 2001 Stephanie Gerthoux: Creation. */ /* */ /********************************************************************************/ T_RV_MISC_RET dar_test_misc (T_RV_MISC_TEST_NBR test_number) { T_RV_MISC_ERR_TYPE error_type = NO_ERR; T_RV_MISC_RET test_verdict = TEST_PASSED; /************************* Start dar_test_misc function *************************/ RV_TEST_TRACE_HIGH ("**************** START DAR MISC ****************"); /************************************************************************/ /* */ /* Memory dump -> check memory and stack used before testing. */ /* */ /************************************************************************/ rvf_dump_mem (); rvf_dump_tasks(); switch (test_number) { case 1: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 1: Dar filter start- add a group"); test_verdict = dar_regr_test_1 (&error_type); break; } case 2: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 2: Dar filter start- search a group"); test_verdict = dar_regr_test_2 (&error_type); break; } case 3: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 3: Dar filter start- delete a group"); test_verdict = dar_regr_test_3 (&error_type); break; } case 4: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 4: DAR filter - add more than DAR max number group "); test_verdict = dar_regr_test_4 (&error_type); break; } case 5: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 5: DAR write function "); test_verdict = dar_regr_test_5 (&error_type); break; } case 6: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 6: DAR write function with bad debug level"); test_verdict = dar_regr_test_6 (&error_type); break; } case 7: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 7: DAR write function - Long data "); test_verdict = dar_regr_test_7 (&error_type); break; } case 8: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 8: DAR write function - Store 2 string"); test_verdict = dar_regr_test_8 (&error_type); break; } case 9: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 9: DAR write function - DAR_NO_DIAGNOSE message"); test_verdict = dar_regr_test_9 (&error_type); break; } case 10: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 10: DAR emergency function ( PC)"); test_verdict = dar_regr_test_10 (&error_type); break; } case 11: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 11: DAR recovery get status after an ON/OFF"); test_verdict = dar_regr_test_11 (&error_type); break; } case 12: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 12: DAR reset system"); test_verdict = dar_regr_test_12 (&error_type); break; } case 13: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 13: DAR diagnose generate emergency (board)"); test_verdict = dar_regr_test_13 (&error_type); break; } case 14: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 14: DAR start watchdog timer"); test_verdict = dar_regr_test_14 (&error_type); break; } case 15: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 15: DAR reload watchdog timer"); test_verdict = dar_regr_test_15 (&error_type); break; } case 16: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 16: DAR start watchdog timer + infinite loop"); test_verdict = dar_regr_test_16 (&error_type); break; } case 17: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 17: DAR start watchdog timer + stop + infinite loop"); test_verdict = dar_regr_test_17 (&error_type); break; } case 18: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 18: DAR Exception: Jump to unknown address "); test_verdict = dar_regr_test_18 (&error_type); break; } case 19: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 19: DAR Exception : Jump to variables address"); test_verdict = dar_regr_test_19 (&error_type); break; } case 20: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 20: DAR recovery get status and get recovery data"); test_verdict = dar_regr_test_20 (&error_type); break; } case 21: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 21: DAR - Branch to 0 with a callback = NULL "); test_verdict = dar_regr_test_21 (&error_type); break; } case 22: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 22: Redirect trace(Warning/Error) to DAR"); test_verdict = dar_regr_test_22 (&error_type); break; } case 23: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 23: Redirect trace(Warning/Error) to DAR"); test_verdict = dar_regr_test_23 (&error_type); break; } case 24: { RV_TEST_TRACE_HIGH ("**DAR TEST REGR 24: Redirect trace(Error/Warning) to DAR"); test_verdict = dar_regr_test_24 (&error_type); break; } default: { RV_TEST_TRACE_ERROR ("!!! ERROR !!! Invalid DAR test_number value for misc test_type"); test_verdict = TEST_IRRECOVERABLY_FAILED; break; } } /* switch */ trace_dar_test_verdict (test_verdict, 0, test_number, &error_type); trace_dar_test_verdict (test_verdict, test_number, test_number, &error_type); /************************************************************************/ /* */ /* Memory dump -> check memory and stack used before testing */ /* */ /************************************************************************/ rvf_dump_mem (); rvf_dump_tasks(); return (test_verdict); } /************************** Stop dar_test_misc function *************************/ #endif /* #ifdef RVM_DAR_SWE */ #endif /* #if (DAR_MISC == SW_COMPILED) */