FreeCalypso > hg > fc-magnetite
view src/cs/services/etm/etm_misc.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/******************************************************************************** * Enhanced TestMode (ETM) * @file etm_misc.h * * @author Kim T. Peteren (ktp@ti.com) * @version 0.1 * * * History: * * Date Modification * ------------------------------------ * 16/06/2003 Creation * * (C) Copyright 2003 by Texas Instruments Incorporated, All Rights Reserved *********************************************************************************/ #ifndef _ETM_MISC_H_ #define _ETM_MISC_H_ /****************************************************************************** * Usefull Header *****************************************************************************/ #ifndef _WINDOWS #include "swconfig.cfg" #include "sys.cfg" #include "chipset.cfg" //#include "testmode.cfg" #endif #include "l1_confg.h" /* Riviera useful header */ #include "rv/rv_general.h" #include "rvm/rvm_gen.h" #include "rvf/rvf_target.h" #include "rvf/rvf_api.h" #include "rvt/rvt_gen.h" /* include the usefull L1 header */ #ifdef _WINDOWS #define BOOL_FLAG #define CHAR_FLAG #endif #include "l1_types.h" #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_defty.h" #include "l1audio_msgty.h" #include "l1audio_signa.h" #if TESTMODE #include "l1tm_defty.h" #endif #if (L1_GTT == 1) #include "l1gtt_defty.h" #endif #include "l1_const.h" #include "l1_defty.h" #include "l1_msgty.h" #include "l1_signa.h" #ifdef _WINDOWS #define L1_ASYNC_C #endif #include "l1_varex.h" /****************************************************************************** * Defines *****************************************************************************/ #define TM3_PACKET_SIZE 128 #define ETM_PACEKT_SIZE 256 // This is the return TM3 packet structure // HACK! - taken from l1tm_msgty.h typedef struct { unsigned char cid; unsigned char index; unsigned char status; unsigned char size; // size of result[] array unsigned char result[TM3_PACKET_SIZE]; } T_TM3_PKT; // This is the new TM packet structure typedef struct { unsigned short size; // size of data[] int index; // index into data[] - for put()/get() functions unsigned char mid; unsigned char status; unsigned char data[ETM_PACEKT_SIZE]; // include cksum } T_ETM_PKT; #ifndef BASIC_TYPES #define BASIC_TYPES typedef signed char int8; typedef unsigned char uint8; typedef signed short int16; typedef unsigned short uint16; typedef signed int int32; typedef unsigned int uint32; #endif /****************************************************************************** * Prototypes *****************************************************************************/ void *etm_malloc(int size); int etm_free(void *addr); int etm_at(T_ETM_PKT *pkt, char *buf); /****************************************************************************** * Internal Error codes *****************************************************************************/ enum { ETM_TASK_REGISTERED = -100, ETM_DB_LIMIT = -101 }; #endif // _ETM_MISC_H_