FreeCalypso > hg > fc-magnetite
view src/cs/services/lls/tests/lls_test.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/********************************************************************************/ /* */ /* File Name: lls_test.h */ /* */ /* Purpose: This file contains LLS test generic definitions. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 03/12/2002 Laurent Sollier Create. */ /* */ /* (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved */ /* */ /********************************************************************************/ #ifndef _LLS_TEST_H_ #define _LLS_TEST_H_ #include "tests/rv/rv_test_filter_redirect.h" #include "tests/rv/rv_test.h" #if (LLS_TEST == SW_COMPILED) extern T_RVF_MB_ID mb_lls_test; extern T_RV_RETURN lls_test_path; /********************************************************************************/ /* */ /* MACRO Name: lls_test_trace */ /* */ /* Purpose: This macro is called to trace msg in LLS tests. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 03/12/2002 Laurent Sollier Create. */ /* */ /********************************************************************************/ #define lls_test_trace(msg)\ {\ rvf_send_trace ( msg, sizeof(msg)-1, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_HIGH, TRACE_RVTEST);\ } /********************************************************************************/ /* */ /* MACRO Name: lls_test_error */ /* */ /* Purpose: This macro is called to trace ERROR msg in LLS tests. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 03/12/2002 Laurent Sollier Create. */ /* */ /********************************************************************************/ #define lls_test_error(msg)\ {\ rvf_send_trace ( msg, sizeof(msg)-1, NULL_PARAM, RV_TRACE_LEVEL_ERROR, TRACE_RVTEST);\ } #endif /* #if (_LLS_TEST_H_ == SW_COMPILED) */ #endif