FreeCalypso > hg > fc-magnetite
view src/cs/services/mks/mks_cfg.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/** * @file mks_cfg.h * * Configuration file for MKS service. * * This file is part of the MKS API. * * @author Laurent Sollier (l-sollier@ti.com) * @version 0.1 */ /* * History: * * Date Author Modification * ---------------------------------------- * 11/19/2001 L Sollier Create * * * (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved */ #ifndef _MKS_CFG_H_ #define _MKS_CFG_H_ /** Define the number max of magic key sequence. */ #define MKS_NB_MAX_OF_KEY_SEQUENCE (5) /** Define the number max of key in a magic key sequence. */ #define MKS_NB_MAX_OF_KEY_IN_KEY_SEQUENCE (10) /** Define the number max of notified key for post sequence. */ #define MKS_NB_MAX_OF_KEY_FOR_POST_SEQUENCE (10) /** Define time to wait (ms) between two keys before the key sequence reset. */ #define MKS_TIME_RESET_KEY_SEQUENCE 3000 /** Define the maximum size for key sequence name */ #define KPD_MAX_CHAR_NAME 20 #endif /* _MKS_CFG_H_ */