FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/aci_bat_em.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI_BAT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This BAT wrapper modul is ... | +----------------------------------------------------------------------------- */ #include "aci_all.h" /* includes prim.h, which includes p_bat.h */ #include "aci_cmh.h" /* prototypes of sAT_,qAT_,tAT_ */ #include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentEM | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentEM (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_percent_em_mode mode; T_BAT_percent_em_sin_type type = BAT_P_EM_TYPE_NOT_PRESENT; TRACE_FUNCTION ("sBAT_PercentEM()"); mode = cmd->params.ptr_set_percent_em->mode; type = cmd->params.ptr_set_percent_em->sin_type; if ( (mode NEQ BAT_P_EM_MODE_SIN ) AND (mode NEQ BAT_P_EM_MODE_SIN ) ) { return ACI_BAT_FAIL; } if ( (mode EQ BAT_P_EM_MODE_SIN ) AND ((type EQ BAT_P_EM_TYPE_NOT_PRESENT) OR ((type < BAT_P_EM_TYPE_SC) AND (type > BAT_P_EM_TYPE_GRLC ))) ) { return ACI_BAT_FAIL; } if ( (mode EQ BAT_P_EM_MODE_PCO ) AND (type EQ BAT_P_EM_TYPE_NOT_PRESENT) ) { return ACI_BAT_FAIL; } if (type EQ BAT_P_EM_TYPE_NOT_PRESENT) { type = BAT_P_EM_TYPE_SC; } ret = (T_ACI_BAT_RSLT)sAT_PercentEM((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_EM_AT_MODE)mode,(T_EM_AT_TYPE)type); return(ret); }