FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/aci_csf.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI_CSF +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Modul defines the custom specific functions for the | AT Command Interpreter +----------------------------------------------------------------------------- */ #ifndef ACI_CSF_C #define ACI_CSF_C #include "aci_all.h" #include "aci_cmh.h" #ifdef FF_ATI #include "ati_cmd.h" #endif #include "aci_cmd.h" #include "aci.h" /*==== CONSTANTS ==================================================*/ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_CSF | | STATE : code ROUTINE : aci_init_timer | +--------------------------------------------------------------------+ PURPOSE : Initialize the ACI timer. */ GLOBAL void aci_init_timer (void) { TRACE_FUNCTION ("aci_init_timer()"); #if !defined (NEW_FRAME) #ifdef FF_ATI t_ring_handle = vsi_t_open (VSI_CALLER TRING ); #endif t_ect_handle = vsi_t_open (VSI_CALLER TMPTY ); t_mpty_handle = vsi_t_open (VSI_CALLER TMPTY ); t_dtmf_handle = vsi_t_open (VSI_CALLER TDTMF ); #ifdef FAX_AND_DATA t_fit_handle = vsi_t_open (VSI_CALLER TFIT ); #endif #endif /* AoC timers are created if AoC is really supported */ } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_CSF | | STATE : code ROUTINE : aci_exit_timer | +--------------------------------------------------------------------+ PURPOSE : Closes all timer. */ GLOBAL void aci_exit_timer (void) { TRACE_FUNCTION ("aci_exit_timer()"); #if !defined (NEW_FRAME) #ifdef FF_ATI vsi_t_close (VSI_CALLER t_ring_handle); t_ring_handle = VSI_ERROR; #endif #ifdef FAX_AND_DATA vsi_t_close (VSI_CALLER t_fit_handle); t_fit_handle = VSI_ERROR; #endif #endif } #endif