view src/g23m-aci/aci/aci_tim.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_TIM
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This Modul defines the timer handling functions
|             for the AT Command Interpreter
+----------------------------------------------------------------------------- 
*/ 

#ifndef ACI_TIM_C
#define ACI_TIM_C

#include "aci_all.h"

#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#ifdef FAX_AND_DATA
#include "aci_fd.h"
#endif

#include "aci.h"
#include "aoc.h"
#include "psa.h"
#include "cmh.h"

/*==== EXPORT =====================================================*/

/*==== PRIVAT =====================================================*/

/*==== VARIABLES ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_TIM            |
| STATE   : code                        ROUTINE : tim_exec_timeout   |
+--------------------------------------------------------------------+

  PURPOSE : execute timeout function depending on the timer

*/
GLOBAL void tim_exec_timeout (USHORT index)
{
#if defined SMI
    /*
     * Check SMI Timer
     */
    if (smi_timeout (index))
      return;
#endif

#if defined MFW
    /*
     * Check MFW Timer
     */
    if (mfw_timeout (index))
      return;
#endif

    /*
     * check Advice of Charge Timer
     */
   if (aoc_timeout (index))
     return;

#ifdef FF_ATI
    /*
     * check Command Interpreter Timer
     */
    if (aci_timeout (index))
      return;
#endif

    /*
     * check Command Handler Timer
     */
    if (cmh_timeout (index))
      return;

    /*
     * check Command Handler Timer
     */
    if (psa_timeout (index))
      return;
}

#endif