FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/ati_io.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ATI +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : +----------------------------------------------------------------------------- */ #ifndef ATI_IO_H #define ATI_IO_H EXTERN void io_sendChar ( CHAR a, UBYTE srcId ); EXTERN UBYTE uart_new_source( UBYTE device, UBYTE dlci ); #ifdef UART EXTERN void uart_InitCmdStruct( T_ACI_DTI_PRC *cmd_struct ); #endif #define IS_END_CRLF_OUTPUT(x) (x & ATI_END_CRLF_OUTPUT) #define IS_BEGIN_CRLF_OUTPUT(x) (x & ATI_BEGIN_CRLF_OUTPUT) #define IS_ECHO_OUTPUT(x) (x & ATI_ECHO_OUTPUT) #define IS_NORMAL_OUTPUT(x) (x & ATI_NORMAL_OUTPUT) #define IS_CONFIRM_OUTPUT(x) (x & ATI_CONFIRM_OUTPUT) #define IS_INDICATION_OUTPUT(x) (x & ATI_INDICATION_OUTPUT) #define IS_FORCED_OUTPUT(x) (x & ATI_FORCED_OUTPUT) #define IS_ERROR_OUTPUT(x) (x & ATI_ERROR_OUTPUT) #define IS_INFORMATION_TEXT_OUTPUT(x) (x & ATI_INFORMATION_TEXT_OUTPUT) #define IS_RESULT_CODE_OUTPUT(x) (x & ATI_RESULT_CODE_OUTPUT) #endif