FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/ati_omcompat.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 5e39123540e6 |
children |
line wrap: on
line source
/* * This module implements those AT commands that were originally invented * by Openmoko and have been retained in FreeCalypso. */ #ifndef ATI_OMCOMPAT_C #define ATI_OMCOMPAT_C #include "aci_all.h" #include <ctype.h> #include <string.h> #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "aci_io.h" #include "aci_cmd.h" #include "l4_tim.h" #include "line_edit.h" #include "aci_lst.h" #include "pcm.h" #include "audio.h" #include "aci.h" #include "rx.h" #include "pwr.h" #include "l4_tim.h" #ifdef GPRS #ifdef DTI #include "dti.h" #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #endif /* DTI */ #include "gaci.h" #include "gaci_cmh.h" #include "gaci_cmd.h" #endif /* GPRS */ #include "aci_mem.h" #include "aci_prs.h" #include "ati_int.h" #ifndef _SIMULATION_ #include "ffs/ffs.h" #endif #ifdef FF_ATI_BAT #include "typedefs.h" #include "gdd.h" #include "bat.h" #include "ati_bat.h" #endif /*FF_ATI_BAT*/ #include "audio/audio_api.h" #include "abb.h" #include "dar/dar_api.h" EXTERN void alr_get_band_of_serving_cell (char *strbuf); /* * PURPOSE : @ST command (Configure the sidetone level) */ GLOBAL T_ATI_RSLT atAtST (char *cl, UBYTE srcId) { char tmp[8]={0}; INT8 gain = -26; TRACE_FUNCTION("atAtST()"); /* * input functionality */ cl = parse(cl,"s", (LONG)8, tmp); gain = atoi(tmp); if ( cl ) { if ( gain == -23 || gain == -20 || gain == -17 || gain == -14 || gain == -11 || gain == -8 || gain == -5 || gain == -2 || gain == 1 || gain == -26 ) { Side_Tone_Write(gain); return (ATI_CMPL); } else { cmdCmsError(CMS_ERR_OpNotAllowed); return (ATI_FAIL); } } } GLOBAL T_ATI_RSLT queatAtST (char *cl, UBYTE srcId) { char *me="+ST: "; INT8 ST1; TRACE_FUNCTION("queatAtST()"); ST1 = Side_Tone_Read(); sprintf(g_sa,"%s%d",me,ST1); io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT); return (ATI_CMPL); } /* * PURPOSE : @POFF command (Power Off GSM Modem) */ GLOBAL T_ATI_RSLT atAtPOFF (char *cl, UBYTE srcId) { TRACE_FUNCTION("atAtPOFF"); sprintf(g_sa,"%s","OK"); io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT); ABB_Power_Off(); return (ATI_CMPL); } /* * PURPOSE : @RST command (Reset GSM Modem) */ GLOBAL T_ATI_RSLT atAtRST (char *cl, UBYTE srcId) { TRACE_FUNCTION("atAtRST"); dar_reset_system(); return (ATI_CMPL); } /* * PURPOSE : @BAND command (Get RF band) */ GLOBAL T_ATI_RSLT atAtBAND (char *cl, UBYTE srcId) { TRACE_FUNCTION("atAtBAND"); alr_get_band_of_serving_cell(g_sa); io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT); return (ATI_CMPL); } #endif /* ATI_OMCOMPAT_C */