view src/g23m-aci/aci/cmh_gmmq.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module provides the query functions related to the
|             protocol stack adapter for GPRS mobility management ( GMM ).
+----------------------------------------------------------------------------- 
*/ 

#if defined (GPRS) && defined (DTI)

#ifndef CMH_GMMQ_C
#define CMH_GMMQ_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "dti.h"      /* functionality of the dti library */
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#include "dti_conn_mng.h"

#include "pcm.h"

#include "gaci.h"
#include "gaci_cmh.h"
#include "psa.h"
#include "psa_gmm.h"

#include "cmh.h"
#include "cmh_gmm.h"

/*==== CONSTANTS ==================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : finished              ROUTINE : qAT_PlusCGATT            |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CGATT? AT
            command which returns the current state of GPRS attachment.
*/

GLOBAL T_ACI_RETURN qAT_PlusCGATT  ( T_ACI_CMD_SRC srcId, T_CGATT_STATE *state )
{
  TRACE_FUNCTION ("qAT_PlusCGATT()");

  if ( !cmh_IsVldCmdSrc (srcId) )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  switch ( cmhGMM_Get_state() )
  {
    case AS_ATTACHED:
    case AS_SUSPENTED:
      *state = CGATT_STATE_ATTACHED;
      break;
    case AS_INVALID_STATE:
    case AS_MOBILE_OFF:
    case AS_DETACHED:
    case AS_ATTACHING:
    case AS_DETACHING:
    default:
      *state = CGATT_STATE_DETACHED;
      break;
   }

   return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : code                  ROUTINE : qAT_PlusCGCLASS          |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CGCLASS? AT
            command which returns current GACI mobile class.
*/

GLOBAL T_ACI_RETURN qAT_PlusCGCLASS  ( T_ACI_CMD_SRC srcId, T_CGCLASS_CLASS *m_class )
{
   TRACE_FUNCTION ("qAT_PlusCGCLASS()");

/*
 *-------------------------------------------------------------------
 * check command source - should be Serial link ?
 *-------------------------------------------------------------------
 */
   if ( !cmh_IsVldCmdSrc (srcId) ) {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
   }

/*
 *-------------------------------------------------------------------
 * fill in parameters
 *-------------------------------------------------------------------
 */
  switch ( gmmShrdPrm.mobile_class )
  {
    case GMMREG_CLASS_A:
      *m_class = CGCLASS_CLASS_A;     /* mobile class A  (highest) */
      break;
    case GMMREG_CLASS_B:
    case GMMREG_CLASS_BC:
    case GMMREG_CLASS_BG:
      *m_class = CGCLASS_CLASS_B;     /* mobile class B */
      break;
    case GMMREG_CLASS_CG:
      *m_class = CGCLASS_CLASS_CG;    /* mobile class CG (GPRS only mode) */
      break;
    case GMMREG_CLASS_CC:
      *m_class = CGCLASS_CLASS_CC;    /* mobile class CC (circuit switched only mode - lowest) */
      break;
    default: /*bad user command */
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return AT_FAIL;
  }

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : finished              ROUTINE : qAT_PercentCGAATT        |
+--------------------------------------------------------------------+

  PURPOSE : This command get the mode of automatic attach / detach.
*/

GLOBAL T_ACI_RETURN qAT_PercentCGAATT  ( T_ACI_CMD_SRC srcId, T_CGAATT_ATTACH_MODE *att_m, T_CGAATT_DETACH_MODE *det_m )

{
  TRACE_FUNCTION ("qAT_PercentCGAATT()");  

  *att_m = automatic_attach_mode;
  *det_m = automatic_detach_mode;

  return( AT_CMPL );   
}

GLOBAL T_ACI_RETURN qAT_PlusCGREG( T_ACI_CMD_SRC srcId, T_CGREG_STAT *stat, USHORT *lac, USHORT *ci )
{
  TRACE_FUNCTION ("qAT_PlusCGREG()");

  *stat = gmmShrdPrm.cgreg_stat;
  *lac  = gmmShrdPrm.lac;
  *ci   = gmmShrdPrm.cid;

  return( AT_CMPL );
}

GLOBAL T_ACI_RETURN qAT_PercentCGREG   ( T_ACI_CMD_SRC srcId, T_P_CGREG_STAT *stat, USHORT *lac, USHORT *ci )
{
  TRACE_FUNCTION ("qAT_PercentCGREG()");

  *stat = gmmShrdPrm.p_cgreg_stat;
  *lac  = gmmShrdPrm.lac;
  *ci   = gmmShrdPrm.cid;

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : code                  ROUTINE : qAT_PercentCGCLASS       |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %CGCLASS? AT
            command which returns current GPRS mobile class.
*/
GLOBAL T_ACI_RETURN qAT_PercentCGCLASS  ( T_ACI_CMD_SRC srcId, T_PERCENT_CGCLASS *m_class, T_PERCENT_CGCLASS *currentClass )
{
   TRACE_FUNCTION ("qAT_PercentCGCLASS()");

  *m_class = *currentClass = gaciMobileClass.current;
  if( PERCENT_CGCLASS_BX EQ gaciMobileClass.current)
  {
    switch ( gmmShrdPrm.mobile_class )
    {
      case GMMREG_CLASS_BC:
        *currentClass = PERCENT_CGCLASS_BC;
        break;
      case GMMREG_CLASS_BG:
        *currentClass = PERCENT_CGCLASS_BG;
        break;
    }
  }

  return( AT_CMPL );
}
#endif  /* GPRS */
/*==== EOF ========================================================*/