view src/g23m-aci/aci/cmh_ipar.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_IPAR
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_IPAR_C
#define CMH_IPAR_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#ifdef FAX_AND_DATA
  #include "aci_fd.h"
#endif

#include "dti.h"
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"

#include "aci_io.h"

#include "psa.h"
#include "psa_ra.h"
#include "psa_cc.h"
#include "cmh.h"
#include "cmh_ra.h"

#include "wap_aci.h"

#include "psa_tcpip.h"

/*==== CONSTANTS ==================================================*/

/*==== EXPORT =====================================================*/

EXTERN SHORT cmhCC_IPA_Configurated (void);
EXTERN SHORT cmhCC_IPA_Deconfigurated (void);

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_IPAR                |
|                                 ROUTINE : cmhIPA_Configurated     |
+-------------------------------------------------------------------+

  PURPOSE : IPA configurated 
*/

GLOBAL T_ACI_RETURN cmhIPA_Configurated ( void )
{

  TRACE_FUNCTION ("cmhIPA_Configurated()");

  cmhCC_IPA_Configurated();
  
  return (AT_CMPL);
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_IPAR                |
|                                 ROUTINE : cmhIPA_Deconfigurated   |
+-------------------------------------------------------------------+

  PURPOSE : IPA deconfigurated 
*/

GLOBAL T_ACI_RETURN cmhIPA_Deconfigurated ( void )
{

  TRACE_FUNCTION ("cmhIPA_Deconfigurated()");

  cmhCC_IPA_Deconfigurated();
  
  return (AT_CMPL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)           MODULE  : CMH_IPAR              |
| STATE   : code                     ROUTINE : IP_UDP_connect_dti_cb |
+--------------------------------------------------------------------+

  PURPOSE : Callback for connection between IP and UDP.

*/

GLOBAL BOOL IP_UDP_connect_dti_cb(UBYTE dti_id, T_DTI_CONN_STATE result_type)
{
  TRACE_FUNCTION("IP_UDP_connect_dti_cb()");

  switch( result_type)
  {
    case(DTI_CONN_STATE_DISCONNECTING):
      break;

    case(DTI_CONN_STATE_CONNECTED):
      if (wap_state EQ UDPA_Activation)
      {
        wap_state = IPA_Activated;
        psaUDPIP_config_dispatch();
      }
      else
      {
        TRACE_EVENT_P1("IP_UDP_connect_dti_cb(): DTI_CONN_STATE_CONNECTED, but wrong WAP STATE: %d ",wap_state );
      }
      break;

    case(DTI_CONN_STATE_DISCONNECTED):
      if (wap_state EQ UDPA_Deactivation)
      {
        /* wap_state is set to IPA_Deactivated in psaUDPIP_config_dispatch() */
        wap_state = IPA_Deactivation;
        psaUDPIP_config_dispatch();
        dti_cntrl_erase_entry (dti_id);
        dti_cntrl_clear_conn_parms(dti_id);
        if (wap_dti_id EQ dti_id)
        {
          wap_dti_id = DTI_DTI_ID_NOTPRESENT;         
          TRACE_EVENT("IP_UDP_connect_dti_cb(): DTI_CONN_STATE_DISCONNECTED and wap_dti_id resetted");        
        }
      }
      else
      {
        TRACE_EVENT_P1("IP_UDP_connect_dti_cb(): DTI_CONN_STATE_DISCONNECTED, but wrong WAP STATE: %d ",wap_state );
      }
      break;

    case(DTI_CONN_STATE_ERROR):
      /* connection not possible: disconnect */
      dti_cntrl_close_dpath_from_dti_id( dti_id );
      break;

    default:
      TRACE_EVENT("IP_UDP_connect_dti_cb(): call with not awaited value");
      break;
  }
  return TRUE;
}