view src/g23m-aci/aci/cmh_l2r.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_L2R
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the command handler of Layer 2 Relay
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_L2R_H
#define CMH_L2R_H

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/

typedef struct entL2rStatus          /* entity status */
{
  T_ACI_CMD_SRC  entOwn;          /* entity owner */
  T_ACI_AT_CMD   curCmd;          /* current command processing */
  BOOL           isTempDisconnected;            
} T_L2R_ENT_STAT;

/*==== PROTOTYPES =================================================*/

GLOBAL void cmhL2R_TRA_Enabled ( void );
GLOBAL void cmhL2R_Deactivated ( void );
GLOBAL void cmhTRA_Deactivated ( void );

#ifdef DTI
GLOBAL void cmhL2R_TRA_Disabled ( T_DTI_ENTITY_ID entityId);
#endif

GLOBAL void cmhL2R_Failure ( void );

GLOBAL SHORT        cmhL2R_GetCompDir ( void );
GLOBAL UBYTE        cmhL2R_SelCompDir ( T_L2R_CMD_PRM * pCmdPrm );
GLOBAL UBYTE        cmhL2R_SelChnRate ( void );
GLOBAL T_ACI_RETURN cmhL2R_Activate   ( T_ACI_CMD_SRC srcId,
                                        T_ACI_AT_CMD cmdId,
                                        SHORT cId );
GLOBAL T_ACI_RETURN cmhL2R_Deactivate ( void );
GLOBAL T_ACI_RETURN cmhTRA_Deactivate ( void );

#ifdef DTI
GLOBAL void cmhCC_L2R_or_TRA_Activated ( T_DTI_ENTITY_ID activated_module, SHORT cId );
#endif /* DTI */
GLOBAL void cmhCC_L2R_or_TRA_Deactivated ( SHORT cId );

#ifdef DTI
GLOBAL BOOL TRA_connect_dti_cb(UBYTE dti_id, T_DTI_CONN_STATE result_type); 
GLOBAL BOOL L2R_connect_dti_cb(UBYTE dti_id, T_DTI_CONN_STATE result_type); 
#endif /* DTI */


GLOBAL T_ACI_RETURN cmhL2R_Enable     ( void );


/*==== EXPORT =====================================================*/
#ifdef CMH_L2RF_C

GLOBAL T_L2R_ENT_STAT l2rEntStat;

#else

EXTERN T_L2R_ENT_STAT l2rEntStat;

#endif /* CMH_L2RF_C */


#endif /* CMH_L2R_H */

/*==== EOF =======================================================*/