FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/cmh_l2rr.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_L2RR +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module defines the functions which are responsible | for the responses of the protocol stack adapter for | layer 2 relay. +----------------------------------------------------------------------------- */ #ifndef CMH_L2RR_C #define CMH_L2RR_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "aci_lst.h" #include "dti.h" /* functionality of the dti library */ #include "aci_io.h" #include "aci_fd.h" #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #include "aci.h" #include "psa.h" #include "psa_l2r.h" #include "psa_cc.h" #include "cmh.h" #include "psa_ra.h" #include "cmh_ra.h" #include "cmh_l2r.h" #include "cmh_cc.h" #include "psa_tra.h" #include "cmh_ra.h" #ifdef UART #include "psa_uart.h" #include "cmh_uart.h" #endif #ifdef FF_PSI #include "psa_psi.h" #include "cmh_psi.h" #include "ati_src_psi.h" #endif /*FF_PSI*/ #ifdef DTI #include "sap_dti.h" #endif /*==== CONSTANTS ==================================================*/ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_L2RR | | ROUTINE : cmhL2R_TRA_Enabled | +-------------------------------------------------------------------+ PURPOSE : L2R entity enabled, data mode */ GLOBAL void cmhL2R_TRA_Enabled ( void ) { SHORT cId; /* holds call id */ TRACE_FUNCTION ("cmhL2R_TRA_Enabled()"); /* find active call */ cId = psaCC_ctbFindCall( OWN_SRC_INV, CS_ACT, NO_VLD_CT ); if( cId NEQ NO_ENTRY AND psaCC_ctb(cId)->curCmd EQ AT_CMD_O ) { cmhCC_PrepareCmdEnd (cId, NULL, NULL); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_L2RR | | ROUTINE : cmhL2R_Deactivated | +-------------------------------------------------------------------+ PURPOSE : L2R entity deactivated, connection disconnected */ GLOBAL void cmhL2R_Deactivated ( void ) { TRACE_FUNCTION ("cmhL2R_Deactivated()"); cmhCC_L2R_or_TRA_Deactivated(raShrdPrm.cId); /* see issue 7527 why raShrdPrm.cId */ l2rEntStat.curCmd = AT_CMD_NONE; } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_L2RR | | ROUTINE : cmhTRA_Deactivated | +-------------------------------------------------------------------+ PURPOSE : TRA entity deactivated, connection disconnected */ GLOBAL void cmhTRA_Deactivated ( void ) { TRACE_FUNCTION ("cmhTRA_Deactivated()"); cmhCC_L2R_or_TRA_Deactivated(raShrdPrm.cId); } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_L2RR | | ROUTINE : cmhL2R_TRA_Disabled | +-------------------------------------------------------------------+ PURPOSE : L2R entity disabled, escape from data mode */ GLOBAL void cmhL2R_TRA_Disabled ( T_DTI_ENTITY_ID entityId ) { S8 source = psaCC_ctb(raShrdPrm.cId)->calOwn; TRACE_FUNCTION ("cmhL2R_TRA_Disabled()"); switch (entityId) { #ifdef UART case DTI_ENTITY_UART: /* return to command mode */ if (uartShrdPrm.dtr_clearcall EQ FALSE) { R_AT( RAT_OK, (T_ACI_CMD_SRC)source ) ( AT_CMD_NONE ); } break; #endif #if defined (FF_PSI) AND defined (DTI) case DTI_ENTITY_PSI: /* return to command mode */ if (psiShrdPrm.dtr_clearcall EQ FALSE) { R_AT( RAT_OK, (T_ACI_CMD_SRC)source ) ( AT_CMD_NONE ); } break; #endif /*FF_PSI*/ } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_L2RR | | ROUTINE : cmhL2R_Failure | +-------------------------------------------------------------------+ PURPOSE : L2R entity failure, connection will be disconnected */ GLOBAL void cmhL2R_Failure ( void ) { TRACE_EVENT_P1("RLP ERROR: 0x%04x", l2rShrdPrm.set_prm[l2rShrdPrm.owner].err_cause ); /* *------------------------------------------------------------------- * general failure indication *------------------------------------------------------------------- */ cmhCC_L2R_Failed(); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : CMH_L2RR | | STATE : code ROUTINE : L2R_connect_dti_cb | +--------------------------------------------------------------------+ PURPOSE : Callback for connection between L2R and UART. */ #ifdef DTI GLOBAL BOOL L2R_connect_dti_cb(UBYTE dti_id, T_DTI_CONN_STATE result_type) { T_ACI_DTI_PRC *srcInfos; #ifdef FF_PSI T_ACI_DTI_PRC_PSI *srcInfos_psi; #endif /*FF_PSI*/ T_DTI_ENTITY_ID entityId = DTI_ENTITY_UART; T_DTI_CNTRL info; TRACE_FUNCTION("L2R_connect_dti_cb"); if (dti_cntrl_get_info_from_dti_id( dti_id, &info) EQ FALSE) { TRACE_EVENT_P1("cannot find info for dti_id=%d", dti_id); return FALSE; } if ((srcInfos = find_element (uart_src_params, info.src_id, cmhUARTtest_srcId)) NEQ NULL) entityId = DTI_ENTITY_UART; #if defined (FF_PSI) AND defined (DTI) if ((srcInfos_psi = find_element (psi_src_params, info.src_id, cmhPSItest_srcId)) NEQ NULL) entityId = DTI_ENTITY_PSI; else if (srcInfos EQ NULL AND srcInfos_psi EQ NULL) #else else if (srcInfos EQ NULL) #endif /*FF_PSI*/ { TRACE_EVENT_P1 ("[ERR] L2R_connect_dti_cb: srcId=%d not found", info.src_id); return FALSE; } switch( result_type) { case(DTI_CONN_STATE_CONNECTED): cmhL2R_TRA_Enabled(); break; case(DTI_CONN_STATE_DISCONNECTED): dti_cntrl_clear_conn_parms( dti_id ); #ifdef FF_PSI if (srcInfos_psi EQ NULL) { TRACE_EVENT ("[ERR] L2R_connect_dti_cb: srcInfos_psi = NULL"); return FALSE; } #endif /*FF_PSI*/ if (srcInfos EQ NULL) { TRACE_EVENT ("[ERR] L2R_connect_dti_cb: srcInfos = NULL"); return FALSE; } if (l2rEntStat.isTempDisconnected) { #ifdef FF_PSI if (entityId EQ DTI_ENTITY_PSI) BITFIELD_SET (srcInfos_psi->data_cntr, UART_DTI_SB_BIT); else #endif /*FF_PSI*/ BITFIELD_SET (srcInfos->data_cntr, UART_DTI_SB_BIT); l2rEntStat.isTempDisconnected = FALSE; cmhL2R_TRA_Disabled(entityId); } else { /* action already initiated in psa_l2r */ /* cmhL2R_Deactivate(); */ #ifdef FF_PSI if (entityId EQ DTI_ENTITY_PSI) BITFIELD_CLEAR (srcInfos_psi->data_cntr, UART_DTI_SB_BIT); else #endif /*FF_PSI*/ BITFIELD_CLEAR (srcInfos->data_cntr, UART_DTI_SB_BIT); } if (dti_cntrl_is_dti_id_to_reconnect(dti_id)) { T_DTI_ENTITY_ID entity_list[] = {DTI_ENTITY_ACI}; dti_cntrl_clear_dti_id_to_reconnect(dti_id); #ifdef FF_PSI if (entityId EQ DTI_ENTITY_PSI) dti_cntrl_est_dpath_indirect ( info.src_id, entity_list, 1, SPLIT, atiPSI_dti_cb, DTI_CPBLTY_CMD, DTI_CID_NOTPRESENT); else #endif /*FF_PSI*/ dti_cntrl_est_dpath_indirect ( info.src_id, entity_list, 1, SPLIT, atiUART_dti_cb, DTI_CPBLTY_CMD, DTI_CID_NOTPRESENT); } break; case(DTI_CONN_STATE_CONNECTING): case(DTI_CONN_STATE_DISCONNECTING): break; case(DTI_CONN_STATE_ERROR): dti_cntrl_close_dpath_from_dti_id( dti_id ); break; default: TRACE_EVENT("L2R_connect_dti_cb call with not awaited value"); break; } return TRUE; } #endif /* DTI */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : CMH_L2RR | | STATE : code ROUTINE : TRA_connect_dti_cb | +--------------------------------------------------------------------+ PURPOSE : Callback for connection between TRA and UART. */ #ifdef DTI GLOBAL BOOL TRA_connect_dti_cb(UBYTE dti_id, T_DTI_CONN_STATE result_type) { T_ACI_DTI_PRC *srcInfos; #ifdef FF_PSI T_ACI_DTI_PRC_PSI *srcInfos_psi; #endif /*FF_PSI*/ T_DTI_ENTITY_ID entityId = DTI_ENTITY_UART; T_DTI_CNTRL info; TRACE_FUNCTION("TRA_connect_dti_cb"); if (dti_cntrl_get_info_from_dti_id( dti_id, &info) EQ FALSE) { TRACE_EVENT_P1("cannot find info for dti_id=%d", dti_id); return FALSE; } if ((srcInfos = find_element (uart_src_params, info.src_id, cmhUARTtest_srcId)) NEQ NULL) entityId = DTI_ENTITY_UART; #if defined (FF_PSI) AND defined (DTI) if((srcInfos_psi= find_element (psi_src_params, info.src_id, cmhPSItest_srcId)) NEQ NULL) entityId = DTI_ENTITY_PSI; else if (srcInfos EQ NULL AND srcInfos_psi EQ NULL) #else else if (srcInfos EQ NULL) #endif /*FF_PSI*/ { TRACE_EVENT_P1 ("[ERR] TRA_connect_dti_cb: srcId=%d not found", info.src_id); return FALSE; } switch( result_type) { case(DTI_CONN_STATE_CONNECTED): cmhL2R_TRA_Enabled(); break; case(DTI_CONN_STATE_DISCONNECTED): dti_cntrl_clear_conn_parms( dti_id ); #ifdef FF_PSI if (srcInfos_psi EQ NULL) { TRACE_EVENT ("[ERR] L2R_connect_dti_cb: srcInfos_psi = NULL"); return FALSE; } #endif /*FF_PSI*/ if (srcInfos EQ NULL) { TRACE_EVENT ("[ERR] L2R_connect_dti_cb: srcInfos = NULL"); return FALSE; } if (raEntStat.isTempDisconnected) { #ifdef FF_PSI if (entityId EQ DTI_ENTITY_PSI) BITFIELD_SET (srcInfos_psi->data_cntr, UART_DTI_SB_BIT); else #endif /*FF_PSI*/ BITFIELD_SET (srcInfos->data_cntr, UART_DTI_SB_BIT); raEntStat.isTempDisconnected = FALSE; cmhL2R_TRA_Disabled(entityId); } else { #ifdef FF_PSI if (entityId EQ DTI_ENTITY_PSI) BITFIELD_CLEAR (srcInfos_psi->data_cntr, UART_DTI_SB_BIT); else #endif /*FF_PSI*/ BITFIELD_CLEAR (srcInfos->data_cntr, UART_DTI_SB_BIT); /* psaTRA_Deactivate(); */ /* This is done in psa_trap later, otherwise TRA will crash! */ } break; case(DTI_CONN_STATE_CONNECTING): case(DTI_CONN_STATE_DISCONNECTING): break; case(DTI_CONN_STATE_ERROR): dti_cntrl_close_dpath_from_dti_id( dti_id ); break; default: TRACE_EVENT("TRA_connect_dti_cb call with not awaited value"); break; } return TRUE; } #endif /* DTI */ /*==== EOF ========================================================*/