view src/g23m-aci/aci/cmh_mmi.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_MMI
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the command handler
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_MMI_H
#define CMH_MMI_H

/*==== CONSTANTS ==================================================*/
 
 
/*==== TYPES ======================================================*/

#ifdef ACI /* for for ATI only version */
typedef enum
{
  AUDIO_IN  =  75, /* audio in   */
  AUDIO_OUT = 175, /* audio out  */
  KEY_BEEP  = 100, /* key beep   */
  DTMF_TONE = 100, /* dtmf tone  */
  RINGER    = 100  /* ringer     */
}
T_VOLUME_TYPE;

typedef enum
{
  SWITCH_AUDIO_NONE,
  SWITCH_AUDIO_OFF,
  SWITCH_AUDIO_ALERT,
  SWITCH_AUDIO_BUSY,
  SWITCH_AUDIO_CALLWAIT
}
T_ACI_IBT_ACT;

typedef struct
{
  T_ACI_CPI_IBT ati_currIbt;
  T_ACI_CPI_TCH ati_currTch;
  T_ACI_IBT_ACT last_action;
} T_IBT_TYPE;

#endif

/*==== PROTOTYPES =================================================*/
GLOBAL void cmhMMI_keyIndication ( void );
GLOBAL void cmhMMI_rxIndication  ( void );
GLOBAL void cmhMMI_btIndication  ( void );

#ifdef ACI
GLOBAL void cmhMMI_setAudioVolume (  BYTE          audioIn, 
                                     BYTE          audioOut );

GLOBAL void cmhMMI_handleAudioTone ( T_ACI_AT_CMD  cmdId,
																		 UBYTE         response,
                                     T_ACI_CPI_MSG msgType );


/*==== EXPORT =====================================================*/

#ifdef CMH_MMIS_C
GLOBAL T_IBT_TYPE ibt_params;
#else
EXTERN T_IBT_TYPE ibt_params;
#endif

#endif /* ACI */

#endif /* CMH_MMI_H */

/*==== EOF =======================================================*/