view src/g23m-aci/aci/cmh_mmir.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_MMIR
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the functions which are responsible
|             for the responses of the protocol stack adapter for 
|             the subscriber identity module.
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_MMIR_C
#define CMH_MMIR_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "aci.h"
#include "psa_mmi.h"
/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : CMH_MMIR                     |
|                            ROUTINE : cmhMMI_btIndication          |
+-------------------------------------------------------------------+

  PURPOSE : battery level indication

*/

GLOBAL void cmhMMI_btIndication ( void )
{

  TRACE_FUNCTION ("cmhMMI_btIndication()");

  /* process event */
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  rAT_PercentBC( mmiShrdPrm.btLev );
#endif
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : CMH_MMIR                     |
|                            ROUTINE : cmhMMI_rxIndication          |
+-------------------------------------------------------------------+

  PURPOSE : rx level indication

*/

GLOBAL void cmhMMI_rxIndication ( void )
{
  TRACE_FUNCTION ("cmhMMI_rxIndication()");

  /* process event */
  /* actually only needed for SMI */
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  rAT_PercentSQ( mmiShrdPrm.rxLev );
#endif
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : CMH_MMIR                     |
|                            ROUTINE : cmhMMI_keyIndication         |
+-------------------------------------------------------------------+

  PURPOSE : keypad indication

*/

GLOBAL void cmhMMI_keyIndication ( void )
{

  TRACE_FUNCTION ("cmhMMI_keyIndication()");

  /* process event */
#if defined SMI OR defined MFW
  rAT_PercentDRV( DRV_DEV_Keypad, DRV_FCT_KeypadInd,
                  mmiShrdPrm.keyCd, mmiShrdPrm.keySt);
#endif
}

/*==== EOF ========================================================*/