FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/cmh_mmit.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_MMIT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module provides the test functions related to the | protocol stack adapter for the man machine interface. +----------------------------------------------------------------------------- */ #ifndef CMH_MMIT_C #define CMH_MMIT_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "pcm.h" #ifdef FAX_AND_DATA #include "aci_fd.h" #endif /* of #ifdef FAX_AND_DATA */ #ifdef UART #include "dti.h" /* functionality of the dti library */ #include "dti_conn_mng.h" #endif #include "psa.h" #include "psa_sim.h" #include "cmh.h" #include "cmh_sim.h" /* #include "m_fac.h" */ #include "aoc.h" /*==== CONSTANTS ==================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : tAT_PlusCLAN | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CLAN AT command which is responsible for test supporetd language code in ME. */ GLOBAL T_ACI_RETURN tAT_PlusCLAN ( T_ACI_CMD_SRC srcId,SHORT *lastIdx, T_ACI_LAN_SUP *lanlst ) { T_ACI_RETURN ret ; TRACE_FUNCTION ("tAT_PlusCLAN()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { return( AT_FAIL ); } /* *------------------------------------------------------------------- * read supported language from ME *------------------------------------------------------------------- */ ret= getSupLangFromPCM(lanlst,lastIdx); return(ret); } /*==== EOF ========================================================*/