FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/cmh_phbt.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_PHBT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module provides the test functions related to the | protocol stack adapter for the phonebook management. +----------------------------------------------------------------------------- */ #ifndef CMH_PHBT_C #define CMH_PHBT_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #ifdef FAX_AND_DATA #include "aci_fd.h" #endif /* of #ifdef FAX_AND_DATA */ #include "psa.h" #include "phb.h" #include "cmh.h" #include "cmh_phb.h" /*==== CONSTANTS ==================================================*/ #define PHB_CMH_FIRST_IDX (1) /* first index in phonebook */ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_PHBT | | STATE : code ROUTINE : cmhPHB_get_phonebook_info| +--------------------------------------------------------------------+ PURPOSE : This function is used to get the basic adjustments of the current selected phonebook storage. <firstIdx>: first supported index <lastIdx>: last supported index <nlength>: maximum length of phone number <tlength>: maximum length of associated text */ LOCAL T_ACI_RETURN cmhPHB_get_phonebook_info( T_ACI_CMD_SRC srcId, SHORT* firstIdx, SHORT* lastIdx, UBYTE* nlength, UBYTE* tlength ) { T_PHB_CMD_PRM * pPHBCmdPrm; /* points to PHB command parameter */ SHORT maxIdx; /* maximum record index */ UBYTE numLen; /* maximum num length */ UBYTE tagLen; /* maximum tag length */ SHORT dmyUsed; /* dummy variable, not used */ SHORT dmyMaxExt; SHORT dmyUsedExt; #ifndef TI_PS_FFS_PHB UBYTE dmySrvc; /* dummy variable, not used */ SHORT dmyAvail; /* dummy variable, not used */ #endif TRACE_FUNCTION("cmhPHB_get_phonebook_info( )"); /* *----------------------------------------------------------------- * check command source *----------------------------------------------------------------- */ if( ! cmh_IsVldCmdSrc (srcId) ) { return( AT_FAIL ); } pPHBCmdPrm = &cmhPrm[srcId].phbCmdPrm; /* *----------------------------------------------------------------- * fill in parameter <firstIdx>, <lastIdx>, <nlength> and <tlength> *----------------------------------------------------------------- */ if ( pPHBCmdPrm -> cmhStor EQ PB_STOR_NotPresent ) { *firstIdx = ACI_NumParmNotPresent; *lastIdx = ACI_NumParmNotPresent; *nlength = 0; *tlength = 0; return(AT_CMPL); } #ifdef TI_PS_FFS_PHB if (pb_read_sizes ((T_PHB_TYPE)pPHBCmdPrm -> phbStor, &maxIdx, &dmyUsed, &numLen, &tagLen, &dmyMaxExt, &dmyUsedExt) NEQ PHB_OK) #else numLen = 2 * PHB_PACKED_NUM_LEN; if ( pb_read_status ( pPHBCmdPrm -> phbStor, &dmySrvc, &maxIdx, &dmyUsed, &tagLen, &dmyAvail, &dmyMaxExt, &dmyUsedExt ) EQ PHB_FAIL ) #endif { ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_Unknown ); return( AT_FAIL ); } *firstIdx = PHB_CMH_FIRST_IDX; *lastIdx = maxIdx; *nlength = numLen; *tlength = tagLen; /* excluding null termination */ return ( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_PHBT | | STATE : code ROUTINE : tAT_PlusCPBR | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CPBR=? AT command which is responsible to test for all supported memory indices, the length of phone numbers and the length of texts associated with these numbers. <firstIdx>: first supported index <lastIdx>: last supported index <nlength>: maximum length of phone number <tlength>: maximum length of associated text */ GLOBAL T_ACI_RETURN tAT_PlusCPBR ( T_ACI_CMD_SRC srcId, SHORT* firstIdx, SHORT* lastIdx, UBYTE* nlength, UBYTE* tlength ) { TRACE_FUNCTION ("tAT_PlusCPBR ()"); return(cmhPHB_get_phonebook_info(srcId, firstIdx, lastIdx, nlength, tlength)); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_PHBT | | STATE : code ROUTINE : tAT_PlusCPBF | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CPBF=? AT command which is responsible to test for the length of phone numbers and the length of texts associated with these numbers. <nlength>: maximum length of phone number <tlength>: maximum length of associated text */ GLOBAL T_ACI_RETURN tAT_PlusCPBF ( T_ACI_CMD_SRC srcId, UBYTE* nlength, UBYTE* tlength ) { SHORT firstIdx; /* dummy variable, not used */ SHORT lastIdx; /* dummy variable, not used */ TRACE_FUNCTION ("tAT_PlusCPBF ()"); return(cmhPHB_get_phonebook_info(srcId, &firstIdx, &lastIdx, nlength, tlength)); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_PHBT | | STATE : code ROUTINE : tAT_PlusCPBW | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CPBW=? AT command which is responsible to test for all supported memory indices, the length of phone numbers and the length of texts associated with these numbers. <firstIdx>: first supported index <lastIdx>: last supported index <nlength>: maximum length of phone number <tlength>: maximum length of associated text */ GLOBAL T_ACI_RETURN tAT_PlusCPBW ( T_ACI_CMD_SRC srcId, SHORT* firstIdx, SHORT* lastIdx, UBYTE* nlength, UBYTE* tlength ) { TRACE_FUNCTION ("tAT_PlusCPBW ()"); return(cmhPHB_get_phonebook_info(srcId, firstIdx, lastIdx, nlength, tlength)); } /*==== EOF ========================================================*/