view src/g23m-aci/aci/cmh_pppr.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_PPPR
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  
+----------------------------------------------------------------------------- 
*/ 
#if defined (FF_WAP) || defined (FF_PPP) || defined (FF_GPF_TCPIP) || defined (FF_SAT_E)
/* Only for APP's over UDP/IP or TCP/IP or RNET */


#ifndef CMH_PPPR_C
#define CMH_PPPR_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#ifdef FAX_AND_DATA
  #include "aci_fd.h"
#endif

#include "aci_io.h"

#include "psa.h"
#include "psa_ra.h"
#include "psa_cc.h"

#include "cmh.h"

#include "cmh_ra.h"

#include "wap_aci.h"

/*==== CONSTANTS ==================================================*/

/*==== EXPORT =====================================================*/
EXTERN SHORT cmhCC_PPP_Established (ULONG ip_address, USHORT max_receive_unit,
                                    ULONG dns1, ULONG dns2) ;
EXTERN SHORT cmhCC_PPP_Terminated ( void );

EXTERN T_ACI_WAP_STATES wap_state;
EXTERN SHORT		        wapId;

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_IPAS                |
|                                 ROUTINE : cmhPPP_Established      |
+-------------------------------------------------------------------+

  PURPOSE : PPP Established 
*/

GLOBAL T_ACI_RETURN cmhPPP_Established (ULONG ip, USHORT mru,
                                        ULONG dns1, ULONG dns2)
{
  TRACE_FUNCTION ("cmhPPP_established()");
  
  cmhCC_PPP_Established(ip, mru, dns1, dns2) ;
  return (AT_CMPL);
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_IPAS                |
|                                 ROUTINE : cmhPPP_Terminated       |
+-------------------------------------------------------------------+

  PURPOSE : PPP Terminated 
*/

GLOBAL T_ACI_RETURN cmhPPP_Terminated ( void )
{


  TRACE_FUNCTION ("cmhPPP_Terminated()");

  
  cmhCC_PPP_Terminated( );
  
  return (AT_CMPL);
}

#endif /* WAP or TCPIP OR FF_GPF_TCPIP or SAT E */