FreeCalypso > hg > fc-magnetite

view src/g23m-aci/aci/cnf_aci.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  CNF_ACI
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Dynamic Configuration for AT Command Interpreter
+----------------------------------------------------------------------------- 
*/ 

#ifndef CNF_ACI_H
#define CNF_ACI_H

/*==== CONSTANTS ==================================================*/
/*
 * CONFIGURATION PARAMETER
 *
 * Description :  The constants define the commands for dynamic
 *                configuration proposals.
 */

#define  ACI_TIMER_SET       "TIMER_SET"
#define  ACI_TIMER_RESET     "TIMER_RESET"
#define  ACI_TIMER_SPEED_UP  "TIMER_SPEED_UP"
#define  ACI_TIMER_SLOW_DOWN "TIMER_SLOW_DOWN"
#define  ACI_TIMER_SUPPRESS  "TIMER_SUPPRESS"
#define  ACI_KEY_SEQUENCE    "KEY_SEQUENCE"
#define  ACI_EXT_DISPLAY     "EXT_DISPLAY"
#define  ACI_START_AOC       "AOC_PARAMETER"
#define  ACI_KEY_PRESS       "KEY_PRESS"
#define  ACI_KEY_RELEASE     "KEY_RELEASE"
#define  ACI_CPOL_MODE       "CPOL_MODE"
#define  ACI_CPOL_IDX2       "CPOL_IDX2"
#define  ACI_ATI_VIA_TIF     "ATI_VIA_TIF"
#define  ACI_DATA_INPUT      "DATA_INPUT"

#define  TDTE_INACTIVNAME    "TDTE_INACTIV"

/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

#endif