view src/g23m-aci/aci/dcm_state.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Description :  DCM instance is a state machine with several possible states.
|                 Based on the current state, DCM handle different kind of messages/events.
|                 States are listed in the order they should normally be sequenced.
+-----------------------------------------------------------------------------
*/

#ifndef __DCMSTATE_H__
#define __DCMSTATE_H__

/**
 * DCM states.
 *
 * DCM instance is a state machine with several possible states.
 * Based on the current state, DCM handle different kind of messages/events.
 * States are listed in the order they should normally be sequenced.
 *
 * See the Readme file for a description of the state machine.
 */
typedef enum
{
	DCM_OFF,
	DCM_IDLE,
	DCM_ACTIVATING_CONN,
	DCM_CONN_ACTIVATED,
	DCM_CLOSING_CONN
} T_DCM_INTERNAL_STATE;


/**
 * DCM substates.
 *
 * DCM instance is a state machine with several possible states.
 * Substates are included in some states.
 */

typedef enum
{
  DCM_SUB_NO_ACTION = 0,                            /* ALL */
  DCM_SUB_WAIT_CGATT_CNF,                           /* DCM_ACTIVATING_CONN */
  DCM_SUB_WAIT_CGACT_CNF,                           /* DCM_ACTIVATING_CONN */
  DCM_SUB_WAIT_SATDN_CNF,                           /* DCM_ACTIVATING_CONN */
  DCM_SUB_WAIT_SATH_CNF,                            /* DCM_CLOSING_CONN    */
  DCM_SUB_WAIT_CGDEATT_CNF,                         /* DCM_CLOSING_CONN    */
  DCM_SUB_WAIT_CGDEACT_CNF                          /* DCM_CLOSING_CONN    */
} T_DCM_INTERNAL_SUBSTATE;


T_DCM_RET dcm_idle (T_DCM_HDR * msg_p);
T_DCM_RET dcm_activating_conn(T_DCM_HDR * msg_p);
T_DCM_RET dcm_conn_activated(T_DCM_HDR * msg_p);
T_DCM_RET dcm_closing_conn(T_DCM_HDR * msg_p );

T_DCM_RET dcm_new_state(U8 state, U8 substate);
T_DCM_RET dcm_save_state(void);
T_DCM_RET dcm_restore_state(void);
void dcm_dispay_state(U8 state, U8 substate);
void dcm_dispay_sub_state(U8 substate_1, U8 substate_2);


#endif