view src/g23m-aci/aci/l4_tim.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  L4_TIM
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions of timer indices
+----------------------------------------------------------------------------- 
*/ 


/*
 * Timer Indices
 */

#define SMI_TBACKLIGHT           0
#define SMI_TSLIDER              1
#define SMI_TSHIFTKEY            2
#define SMI_TUNIVERSAL           3

#define ACI_TRING                4
#define ACI_TMPTY                5
#define ACI_TFIT                 6
#define ACI_TDTMF                7

#if defined (FAX_AND_DATA)
#define FIT_RUN                  8
#endif

#define AOC_CALLTIMER            9
#define AOC_AOCTIMER             10
#define MAX_AOC_TIMER           7   /* should be changed to MAX_CALL_NR */


/* timers in between are reserved for AOC */
#define MFW_TIMER               (AOC_AOCTIMER+MAX_AOC_TIMER)

#define ACI_IPR                 (MFW_TIMER + 1)
#define ACI_TECT                (ACI_IPR + 1)
#define ACI_TDELAY              (ACI_TECT + 1)

#if defined FF_EOTD /*&& defined _SIMULATION_*/
#define ACI_LC_1                (ACI_TDELAY+1)
#define ACI_LC_2                (ACI_LC_1+1)
#define ACI_LC_3                (ACI_LC_1+2)
#define ACI_LC_4                (ACI_LC_1+3)
#define ACI_LC_5                (ACI_LC_1+4)
#endif

#ifndef FF_EOTD
#define ACI_REPEAT_HND          (ACI_TDELAY +1)
#else
#define ACI_REPEAT_HND          (ACI_LC_1+5)
#endif /* FF_EOTD */

#ifdef SIM_TOOLKIT
#define ACI_SAT_MAX_DUR_HND     (ACI_REPEAT_HND +1)
#define ACI_CNMA_TIMER_HANDLE   (ACI_SAT_MAX_DUR_HND+1)
#else 
#define ACI_CNMA_TIMER_HANDLE   (ACI_REPEAT_HND+1)
#endif /* SIM_TOOLKIT */


#ifdef VOCODER_FUNC_INTERFACE
#define ACI_VOCODER             (ACI_CNMA_TIMER_HANDLE+1)
#endif

#ifdef SIM_PERS
  #ifdef VOCODER_FUNC_INTERFACE
    #define ACI_UNLOCK_TIMER_HANDLE   (ACI_VOCODER+1)
  #else
    #define ACI_UNLOCK_TIMER_HANDLE   (ACI_CNMA_TIMER_HANDLE+1)
  #endif
#endif



#define ACI_REPEAT_1         5000   /* 5 sec for waiting for 1th redialling */
#define ACI_REPEAT_2_4       60000  /* 1 min for waiting for 2th to 4th redialling */
#define ACI_CNMA_TIMER_VALUE 15000  /* 15 sec. for waiting for the +CNMA */
#define ACI_DELAY_TIMER      5000   /* 5 sec delay for various REDIAL attempts */
#ifdef SIM_PERS
#define ACI_UNLOCK_TIMER      10000   /* 2 sec delay for various wrong unlock/unblock attempts */
#endif