FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/line_edit.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : line +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul ... +----------------------------------------------------------------------------- */ #ifndef LINE_EDIT_H #define LINE_EDIT_H /* **************************************************************************************************** * public stuff * **************************************************************************************************** */ typedef enum { LEDIT_FAIL = -1, LEDIT_EXCT = 0, LEDIT_CMPL, LEDIT_COLLECT, LEDIT_ESC, /* in text mode do nothing when received ESC */ LEDIT_OK, /* for single <CR> and simple "AT<CR>" */ LEDIT_IGNORE /* ignore chars before A and between A..T */ } T_LEDIT_RSLT; typedef enum { LEDIT_ERR_NONE = -1, /*000*/ LEDIT_ERR_NoMemory , /*001*/ LEDIT_ERR_NoMaintenance, /*002*/ LEDIT_ERR_NoValidCommand, /*003*/ LEDIT_ERR_LastCmdPending, /*004*/ LEDIT_ERR_Unknown } T_LEDIT_ERR_CODE; typedef struct /* error code - error message mapping */ { CHAR* msg; /* error message */ T_LEDIT_ERR_CODE code; /* error code */ } T_LEDIT_ERR; typedef enum { LEDIT_CTRL_ERROR, LEDIT_CTRL_CMPL, LEDIT_CTRL_REMOVE_SRC, LEDIT_CTRL_PROMPT, LEDIT_CTRL_CRLF_PROMPT, LEDIT_CTRL_MORE_CMDS } T_LEDIT_CTRL; typedef struct { UBYTE S3; /* CR */ UBYTE S4; /* LF */ UBYTE S5; /* BS */ UBYTE atE; /* Command Echo: ON */ UBYTE smsEnd;/* want to be non V25.ter conform */ } T_LEDIT; /* initial = {13, 10, 8, 1, 0x1a}; */ /* S3 S4 S5 E, smsEnd */ /* done by liblineedit.a */ /* can be overwritten by ledit_ctrl() */ typedef enum { LEDIT_ATCMD_NIL = 0x00, LEDIT_ATCMD_AND = 0x26, /* '&' */ LEDIT_ATCMD_BASIC = 0x42, /* 'B' */ LEDIT_ATCMD_DIAL = 0x44, /* 'D' */ LEDIT_ATCMD_EXTENDED = 0x45, /* 'E' */ LEDIT_ATCMD_S = 0x53 /* 'S' */ } T_LEDIT_ATCMD_MAINTYPE; typedef enum { LEDIT_ATCMD_QUERY = 0x51, LEDIT_ATCMD_SET = 0x53, /* 'S' */ LEDIT_ATCMD_TEST = 0x54 /* 'T' */ } T_LEDIT_ATCMD_SUBTYPE; typedef struct { T_LEDIT_ATCMD_MAINTYPE mType; T_LEDIT_ATCMD_SUBTYPE sType; UBYTE append_Flag; } T_LEDIT_ATCMD_TYPE; typedef struct { T_LEDIT_ATCMD_TYPE type; char *name; char *params; } T_LEDIT_ATCMD; /* * taken from ACI.doc, must be removed when including "P_ACI.val" ! * #define MAX_CMD_LEN 350 */ /* * global echo buffer */ EXTERN char g_ledit_echoBuf[MAX_CMD_LEN+1]; /* * public functions */ EXTERN T_LEDIT_RSLT ledit_cmd (UBYTE src_id, const UBYTE *chars, USHORT len); EXTERN T_LEDIT_RSLT ledit_text (UBYTE src_id, const UBYTE *chars, USHORT len); EXTERN T_LEDIT_RSLT ledit_get_first (UBYTE src_id, T_LEDIT_ATCMD **cmd); EXTERN T_LEDIT_RSLT ledit_get_next (UBYTE src_id, T_LEDIT_ATCMD **cmd); EXTERN T_LEDIT_RSLT ledit_get_current(UBYTE src_id, T_LEDIT_ATCMD **cmd); EXTERN T_LEDIT_RSLT ledit_get_text (UBYTE src_id, char **txt); EXTERN T_LEDIT_RSLT ledit_ctrl (UBYTE src_id, T_LEDIT_CTRL ctrl, T_LEDIT_ERR **err); EXTERN T_LEDIT_RSLT ledit_set_config (UBYTE src_id, T_LEDIT line); EXTERN T_LEDIT_RSLT ledit_trace_line (UBYTE src_id, char *txt); #endif