view src/g23m-aci/aci/psa_f.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 717ed17d82c6
children
line wrap: on
line source

/* 
+-----------------------------------------------------------------------------
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_F
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This module defines global functions of the protocol
|             stack adapters.
+-----------------------------------------------------------------------------
*/

#ifndef PSA_F_C
#define PSA_F_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "psa.h"
#include "aci.h"
#include "l4_tim.h"

#include "psa_cc.h"
#if defined FF_EOTD
#include "psa_lc.h"
#endif

#ifdef UART
#include "dti_conn_mng.h"
#endif

#ifdef GPRS
#include "gaci_cmh.h"
#include "psa_gmm.h"
#include "psa_sm.h"
#include "psa_gppp.h"
#include "ffs/ffs.h"
#include "ffs_coat.h"
#endif /* GPRS */

#include "aci_lst.h"

#ifdef UART
#include "dti.h"      /* functionality of the dti library */
#include "psa_uart.h"
#include "cmh_uart.h"
#endif

/* removed in FreeCalypso */
#if 0 //#ifdef VOCODER_FUNC_INTERFACE
#include "hl_audio_drv.h"
#endif

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH                     |
|                                 ROUTINE : psa_Init                |
+-------------------------------------------------------------------+

  PURPOSE : initialize the protocol stack adapters.

*/

GLOBAL void psa_Init ( void )
{

/*
 *-------------------------------------------------------------------
 * set default parms for protocol stack adapters
 *-------------------------------------------------------------------
 */

 /* --- psa init functions --- */
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH                     |
|                                 ROUTINE : psa_IsVldOwnid          |
+-------------------------------------------------------------------+

  PURPOSE : check for a valid owner id.

*/

GLOBAL BOOL psa_IsVldOwnId ( T_OWN ownId )
{
  if( ownId > ((T_OWN)CMD_SRC_NONE) AND ownId < OWN_SRC_MAX )

    return TRUE;

  return( FALSE );
}

/*
+--------------------------------------------------------------------+
| PROJECT: GSM-PS (6147)                MODULE:  ACI_CMD             |
| STATE  : code                         ROUTINE: psa_timeout         |
+--------------------------------------------------------------------+

  PURPOSE : A timeout has occured for a timer. The function returns
            TRUE, if it is a timer which is handled by PSA, else FALSE
            is returned to indicate that the timer has not been
            processed.

*/

GLOBAL UBYTE psa_timeout (USHORT index)
{
  TRACE_FUNCTION ("psa_timeout()");

  switch(index)
  {
  case(ACI_TDTMF):
    /* timeout dtmf timer */
    psaCC_DTMFTimeout();
    return(TRUE);

/* removed in FreeCalypso */
#if 0 //#ifdef VOCODER_FUNC_INTERFACE
  case(ACI_VOCODER):
  {
    T_HL_VOCODER_ACTION tmpcurrVocoderAction = currVocoderAction;
    currVocoderAction = VOCODER_IDLE;
    /*
     * If the vocoder state is PENDING_ENABLE/DISABLE then  
     * call the function hl_drv_set_vocoder_state() to Enable/Disable 
     * vocoder depending on the state.
     */
    switch(tmpcurrVocoderAction)
    {
      case VOCODER_PENDING_DISABLE:
        hl_drv_set_vocoder_state(FALSE); /* Disable vocoder */
        break;

      case VOCODER_PENDING_ENABLE:
        hl_drv_set_vocoder_state(TRUE);  /* Enable vocoder */
        break;

      default:
        TRACE_ERROR ("Unexpected timeout in state");
        break;
    }

    return (TRUE); /* Timeout event handled */
  }
#endif

#ifdef UART
  case(ACI_IPR):
    /* timeout AT+IPR: change baud rate */
    timeout_PlusIPR();
    return(TRUE);
#endif
    
#if defined FF_EOTD
  case(ACI_LC_1):
  case(ACI_LC_2):
  case(ACI_LC_3):
  case(ACI_LC_4):
  case(ACI_LC_5):
    psaLC_posDataReq(index);
    return(TRUE);
#endif /* FF_EOTD */
  }

  /* the timeout is not for PSA */
  return FALSE;
}

#if defined (GPRS) AND defined (DTI)
/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH                     |
|                                 ROUTINE : psa_GPRSInit            |
+-------------------------------------------------------------------+

  PURPOSE : initialize the protocol stack adapters.

*/
#define FACTOR_T3314   1000
#define FACTOR_T3312  60000

GLOBAL void psa_GPRSInit ( void )
{
  T_FFS_GPRS_ACI ffsBuffer;

  T_FFS_SIZE size = FFS_fread("/GPRS/baspar_gprs", &ffsBuffer, sizeof(T_FFS_GPRS_ACI));
  
  if ( size NEQ sizeof(T_FFS_GPRS_ACI) )
  {
#   ifndef _SIMULATION_
    if ( size < 0 )
    {
      TRACE_EVENT_P1("FFS can not read \"/GPRS/baspar_gprs\" (%d)", size);
    }
    else
    {
      TRACE_EVENT_P2("FFS contains old file of \"/GPRS/baspar_gprs\": %dBytes long, but %dBytes expected",
                      size, sizeof(T_FFS_GPRS_ACI));
    }
#   endif /* NOT DEFINED _SIMULATION_ */

    ffsBuffer.max_cid               = 2;     /* not supported at this moment */
    ffsBuffer.auto_attach           = (UBYTE) CGAATT_ATTACH_MODE_MANUAL;/* 1 */
    ffsBuffer.auto_detach           = (UBYTE) CGAATT_DETACH_MODE_OFF;   /* 1 */
    ffsBuffer.default_mobile_class  = (UBYTE) GMMREG_CLASS_BG;          /* 4 */
    ffsBuffer.accm                  = 0;                               /*  3 */
    ffsBuffer.restart_timer         = PPP_RT_DEFAULT;                  /*  3 */
    ffsBuffer.max_configure         = PPP_MC_DEFAULT;                  /* 10 */
    ffsBuffer.max_terminate         = PPP_MT_DEFAULT;                  /*  2 */
    ffsBuffer.max_failure           = PPP_MF_DEFAULT;                  /*  5 */
  }

  psaGPPP_Init( ffsBuffer.accm, ffsBuffer.restart_timer,
                ffsBuffer.max_configure, ffsBuffer.max_terminate, ffsBuffer.max_failure );
  psaGMM_Init( ffsBuffer.auto_attach,ffsBuffer.auto_detach, ffsBuffer.default_mobile_class   );
  psaSM_Init();
}
#endif /* GPRS */

/*==== EOF ========================================================*/