FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/psa_gppps.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module defines the signalling functions of the | protocol stack adapter for GPRS Point-to-Point Protocol ( PPP ). +----------------------------------------------------------------------------- */ #if defined (GPRS) && defined (DTI) #ifndef PSA_GPPPS_C #define PSA_GPPPS_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "dti.h" /* functionality of the dti library */ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "aci.h" #include "psa.h" #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #include "psa_gppp.h" /*==== CONSTANTS ==================================================*/ #define TOK_STR " =\t" /* string of token delimiter */ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +-------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PPPS | | STATE : finished ROUTINE : psaGPPP_Establish | +-------------------------------------------------------------------+ PURPOSE : request establishment of PPP connection */ GLOBAL void psaGPPP_Establish ( T_PPP_ESTABLISH_REQ *est_req ) { TRACE_FUNCTION ("psaGPPP_Establish()"); /* *------------------------------------------------------------------- * create and send primitive for establich PPP *------------------------------------------------------------------- */ { PALLOC (ppp_establish_req, PPP_ESTABLISH_REQ); *ppp_establish_req = *est_req; PSEND (hCommPPP, ppp_establish_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PPPS | | STATE : finished ROUTINE : psaGPPP_Terminate | +-------------------------------------------------------------------+ PURPOSE : close the PPP connection */ GLOBAL void psaGPPP_Terminate ( UBYTE lower_layer ) { TRACE_FUNCTION ("psaGPPP_Terminate()"); /* *------------------------------------------------------------------- * create and send primitive for network attach *------------------------------------------------------------------- */ { PALLOC (ppp_terminate_req, PPP_TERMINATE_REQ); /* fill in primitive parameter: registration mode */ ppp_terminate_req -> lower_layer = lower_layer; PSEND (hCommPPP, ppp_terminate_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PPPS | | STATE : finished ROUTINE : psaGPPP_PDP_Activate | +-------------------------------------------------------------------+ PURPOSE : the PDP context is activated (only in server mode) */ GLOBAL void psaGPPP_PDP_Activate ( T_NAS_ip * ip, UBYTE *pco_buf, UBYTE pco_length, U8 nsapi) { TRACE_FUNCTION ("psaGPPP_PDP_Activate()"); /* *------------------------------------------------------------------- * create and send primitive for network attach *------------------------------------------------------------------- */ { PALLOC_SDU (ppp_pdp_activate_res, PPP_PDP_ACTIVATE_RES, (USHORT)(pco_length << 3)); /* Issue OMAPS00047332: SM, SNDCP and UPM are not supporting ppp_hc and msid. * these two parameter should only be removed after * PPP SAP modification. till then reset it to 0. */ ppp_pdp_activate_res->ppp_hc = 0; ppp_pdp_activate_res->msid = 0; #ifdef _SIMULATION_ #pragma message("A check of the IP version is needed before starting a PPP connection.") #endif ppp_pdp_activate_res->ip = ip->ip_address.ipv4_addr.a4[0] << 24; ppp_pdp_activate_res->ip += ip->ip_address.ipv4_addr.a4[1] << 16; ppp_pdp_activate_res->ip += ip->ip_address.ipv4_addr.a4[2] << 8; ppp_pdp_activate_res->ip += ip->ip_address.ipv4_addr.a4[3]; ppp_pdp_activate_res->sdu.l_buf = pco_length << 3; ppp_pdp_activate_res->sdu.o_buf = 0; if ( pco_length ) { memcpy(&ppp_pdp_activate_res->sdu.buf, pco_buf, pco_length); } PSEND (hCommPPP, ppp_pdp_activate_res); } } /* +-------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PPPS | | STATE : finished ROUTINE : psaGPPP_PDP_Reject | +-------------------------------------------------------------------+ PURPOSE : the PDP context can't activated (only in server mode) */ GLOBAL SHORT psaGPPP_PDP_Reject ( void ) { TRACE_FUNCTION ("psaGPPP_PDP_Reject()"); /* *------------------------------------------------------------------- * check owner id *------------------------------------------------------------------- */ if(!psa_IsVldOwnId((T_OWN)gpppShrdPrm.owner)) return( -1 ); /* *------------------------------------------------------------------- * create and send primitive for network attach *------------------------------------------------------------------- */ PSEND (hCommPPP, gpppShrdPrm.setPrm[gpppShrdPrm.owner].pdp_rej); return 0; } /* +-------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PPPS | | STATE : finished ROUTINE : psaGPPP_Modification | +-------------------------------------------------------------------+ PURPOSE : negotiate header compression again (only in server mode) */ /* NEEDED ???*/ /* LOCAL SHORT psaGPPP_Modification ( void )*/ /* {*/ /* T_PPP_SET_PRM * pPrmSet; *//* points to used parameter set */ /* TRACE_FUNCTION ("psaGPPP_Modification()");*/ /* *------------------------------------------------------------------- * check owner id *------------------------------------------------------------------- */ /* if(!psa_IsVldOwnId(gpppShrdPrm.owner)) return( -1 ); pPrmSet = &gpppShrdPrm.setPrm[gpppShrdPrm.owner]; */ /* *------------------------------------------------------------------- * create and send primitive for network attach *------------------------------------------------------------------- */ /* { PALLOC (ppp_modification_req, PPP_MODIFICATION_REQ);*/ /* fill in primitive parameter: registration mode */ /* ppp_modification_req -> ppp_hc = pPrmSet -> ppp_hc; ppp_modification_req -> msid = pPrmSet -> msid; PSEND (hCommPPP, ppp_modification_req); } return 0; }*/ #endif /* GPRS */ /*==== EOF ========================================================*/