view src/g23m-aci/aci/psa_mmi.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_MMI
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the protocol stack adapter 
|             man machine interface ( MMI )
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_MMI_H
#define PSA_MMI_H


/*==== CONSTANTS ==================================================*/

#define TEST_STR_LEN (80) /* max. length of test parameter string */

#define NO_ENTRY     (-1) /* not a valid entry */

/*==== TYPES ======================================================*/

typedef struct MMIShrdParm
{
  UBYTE  keyCd;                    /* key code */
  UBYTE  keySt;                    /* key status */
  UBYTE  rxLev;                    /* rx level */
  UBYTE  btLev;                    /* battery level */
  void*  dspRq;                    /* display request */
  UBYTE cmdSrc;                    /* source of current command */
} T_MMI_SHRD_PRM;

/*==== PROTOTYPES =================================================*/

SHORT psaMMI_Display     ( void );
SHORT psaMMI_Cbch        ( void );

void  psaMMI_Init        ( void );

EXTERN void psaMMI_ConfigPrim (T_HANDLE receiver_handle, 
                               CHAR     *config_msg);


/*==== EXPORT =====================================================*/

#ifdef PSA_MMIF_C

GLOBAL T_MMI_SHRD_PRM mmiShrdPrm;

#else

EXTERN T_MMI_SHRD_PRM mmiShrdPrm;

#endif /* PSA_MMIF_C */

 

#endif /* PSA_MMI_H */

/*==== EOF =======================================================*/